User Manual

ELA-1 Reference Manual 78
9
Mixer
Move the cursor to the desired position by using the Cursor buttons, and then use the Data dial or the [u]/
[d] buttons to edit parameters.
This function modifies the tonal characteristics (brightness, etc.) of the sound by cutting the output of a specific
frequency portion of the sound.
Editing “Volume/Pan” Parameters
Voice, etc. Allows you to re-select the Voices for each keyboard part or each part (channel) of the
Style or Song. Press the [ENTER] button to call up the Voice selection page for the part.
After selecting the desired Voice, press the [EXIT] button to return to the “Mixer” dis-
play.
When the “Panel” part is selected, the same operation allows you to re-select the Style,
Song or Audio file (instead of the Voice) for the corresponding part.
NOTE When a GM Song is selected, only a Drum Kit Voice can be selected for channel 10 (in the “Song 9-16” page).
NOTE For a Style or Song channel, calling up a rhythm/percussion Voice (Drum Kit, etc.) will replace the channel settings with
those for the new Voice. In such a case, the original settings may not be restored even if you re-select the original Voice. To
restore the original sound, select the same Style or Song again without carrying out the Save operation.
Panpot Determines the stereo position of the selected part (channel).
Volume Determines the volume of each part or channel, giving you fine control over the balance
of all the parts.
Editing “Filter” Parameters
Voice, etc.