ELB-02 Owner’s Manual Before using the instrument, be sure to read “PRECAUTIONS” on pages 4-5. For information on assembling the instrument, refer to the instructions at the end of this manual.
ELB-02 Owner’s Manual
ELB-02 Owner’s Manual 3
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe and handy place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards.
Connections Using the bench (If included) • Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. • Be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level. • Do not place the bench in an unstable position where it might accidentally fall over.
NOTICE To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below. Handling • Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise.
About functions/data bundled with the instrument • This device is capable of using various types/formats of music data by optimizing them to the proper format music data for use with the device in advance. As a result, this device may not play them back precisely as their producers or composers originally intended. • The bitmap fonts used in this instrument have been provided by and are the property of Ricoh Co., Ltd.
Congratulations! Thank you for purchasing this Yamaha Electone! We recommend that you read this manual carefully so that you can fully take advantage of the advanced and convenient functions of the instrument. We also recommend that you keep this manual in a safe and handy place for future reference.
About the Manuals This instrument has the following documents and instructional materials. Included Documents Owner’s Manual (this book) Provides overall explanations of the Electone functions.
Contents PRECAUTIONS.................................................................... 4 NOTICE ................................................................................ 6 Information............................................................................ 6 Congratulations! ................................................................... 8 Included Accessories............................................................ 8 About the Manuals......................................................
Changing the Tempo ............................................... Repeat Playback...................................................... Playing Back XG Songs ........................................... Other Operations — Copy, Delete, etc. ........................... Copy......................................................................... Song Delete/Folder Delete....................................... Creating folders ....................................................... Converting to XG format ...
Main Features Wide Variety of Registration Menus page 20 The Registration Menu buttons feature a total of 601 Registrations, allowing you to instantly set up the Electone for playing your favorite type of music. The Registrations in Registration Menu are divided into six basic categories for ease of selection. Moreover, you can edit any of the Registrations and customize them to fit your own performance needs.
Panel Controls and Terminals Overview Upper Keyboard page 29 Music Rest page 8 Lower Keyboard page 29 [USB TO DEVICE] terminal page 183 MIDI terminals page 183 [USB TO DEVICE] terminal page 183 Front Panel [USB TO HOST] terminal page 183 [AUX IN] jack page 182 [AC IN] jack For connecting a power cord.
Front Panel Panel Setup (Panel Settings) By using the controls on the panel, you can make various settings such as selecting a Voice or Style, tuning the pitch, and so on. These settings of the instrument are together referred to as “panel setup” or “panel settings” in this manual. [VOICE SECTION 2] button Switches between Voice sections 1 and 2 (page 33).
Page buttons DATA CONTROL dial Selects the Page of the display (page 26). Selects the setting or value in the display (page 25). Data Control [A] – [D] buttons Selects items and changes the values/ settings in the display (page 25). [9-16] button [MEMORY] button (page 112) (page 111) REGISTRATION MEMORY buttons For registering and recalling panel setups (page 111). [DISABLE] button (page 114) MASTER VOLUME dial Adjusts the overall volume (page 17).
Quick Introductory Guide 1 Power Supply Connect the plugs of the power cord in the order shown in the illustration. WARNING Use only the supplied power cord. CAUTION 1 When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. 2 [AC IN] jack (page 13) AC Outlet The shape of the plug and outlet differs depending on your locale.
This last display, Voice Display, shows you the currently assigned voice settings for each Voice section (page 31). 3 Press and hold the [P] (Standby/On) switch for about a second to turn the power off. Quick Introductory Guide When you turn on the Electone, the following displays will appear one after the other on the LCD display: CAUTION Even when the [P] (Standby/On) switch is in standby status, electricity is still flowing to the instrument at the minimum level.
4 Adjusting the Contrast of the Display You can adjust the contrast of the display. Quick Introductory Guide 1 2 NOTICE The LCD contrast setting is automatically saved when another display is called up. Make sure to switch to another display before turning the power off. 18 ELB-02 Owner’s Manual 3 Press the [UTILITY] button on the panel to call up the Utility display. Since the contrast setting is set in Utility display Page 1, select Page 1 with the page buttons if another page is shown.
5 Using Headphones CAUTION Quick Introductory Guide To use headphones, connect them to the PHONES jack (standard stereo phone jack). Do not use the headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss.
1 Basic Operation 1 Registration Menu NOTE Additional basic Registrations are preset on the Registration Memory locations from 1 to 16. See page 116 for details. The Registration Menu is a simple, highly convenient way to instantly change all the Electone settings for playing in specific music styles. A Registration consists of panel settings including the selected Upper Keyboard Voices, Lower Keyboard Voices, Pedal Voices, the assigned rhythm and so on.
Changing Pages 1 Basic Operation Page buttons REGISTRATION MENU buttons [1] – [5] contain two display pages: “01” and “02,” each of which contain two different sets of Registrations. Page 01 features the same Registration Menu as that of the ELB-01, while Page 02 features new Registration Menus for the ELB-02. From each of the 01 and 02 pages, select the desired Registration. 3 Play your favorite song with the selected Registration.
Registration Menu List [ 0 ] BASIC 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 1 Basic Operation 22 Simple 1 St/St Simple 2 St/Hr Simple 3 Cl/St Simple 4 Cl/Hr Simple 5 Tp/St Simple 6 Tp/Hr Simple 7 Ob/St Simple 8 Ob/Bsn Simple 9 Fl/St Simple 10 Fl/Cl Simple 11 Cl/Cl Simple 12 Pf/Pf Simple 13 Cl/Bsn Sound Effect 1 Sound Effect 2 Sound
Page 01 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 Dynamic 8Beat NY Ballad British Pop 8Beat Modern Rock Band Detroit Pop Techno Pop Sheriff Reggae Rock & Roll Power Rock 60s Guitar Rock Unplugged Motor City Lovely Shuffle Gospel Shuffle Joyful Gospel Frankly Soul Soul Gospel 6/8 Soul Hit Pop New Country Eternal Pop Ground Beat Bounce Pop *A Bounce Pop *B Bounce Pop *C Bounce Pop *D Blues Jam *A Blues Jam *
[ 4 ] JAZZ&LATIN Page 01 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 1 Basic Operation Blow On Sax Sax Ensemble Moonlight Big Band Clarinet Swing Jazz Combo Medium Jazz Organ Session Guitar Combo Tender Ballad Jazz Waltz Five-Four Big Band Samba Mambo Brass Mambo Tenor Montuno Bossa Nova Pop Bossa Sweet Rumba Beguine Cha Cha Cha Mellow Groove Modern R&B Dixieland Jazz Jungle Drum *A Jungle Drum *B Jungle Dr
2 Using the LCD display Many of the Electone’s operations are done from the LCD display. Pressing a button on the panel automatically calls up the relevant function for the corresponding button in the display. Depending on the display that appears, you can conveniently perform various functions and change values/settings by using the [A] – [D] buttons (located at the immediate right side of the LCD) and the DATA CONTROL dial (at the right of the [A] – [D] buttons).
Changing the Display Page Page buttons Display name 1 Page Basic Operation Shows the number of pages and the current page. The current page is shown with a long bar (_), while other available pages are shown as dots (.). Page 1 Page 2 Page 3 Page buttons are used to select the various ‘pages’ of the display (when available), with the currently selected page number appearing at the top right of the LCD.
3 Basic Operation Selecting the Display Language 1 1 2 Basic Operation The LCD display can be shown in two languages, English and Japanese. The default setting is English. Press the [UTILITY] button on the panel. The Utility display appears. Since the language is set in Utility display Page 1, select Page 1 with the page buttons if another page is shown.
2 While holding down the ENDING [1] button, turn the power back on. 1 Basic Operation 3 Release the ENDING [1] button after the Voice Display appears. Confirming the Version of Your Electone You can confirm the version of your Electone by the following procedure. 1 2 28 ELB-02 Owner’s Manual Press the [UTILITY] button. The Utility display appears. Select Page 8 by using the Page buttons. The Version appears in the display.
2 Voices This Electone features hundreds of high quality Voices. Any of these Voices can be used on the Upper Keyboard, Lower Keyboard and Pedalboard. Up to four Voice sections are available on the Upper Keyboard for playing together in a layer, while the Lower Keyboard and Pedalboard each have two Voice sections.
Voices for the Lower Keyboard Up to two different Voice sections are available on the Lower Keyboard for playing together: Lower Keyboard Voice 1 and Lower Keyboard Voice 2. Voices for each section can be selected from the panel’s “LOWER KEYBOARD VOICE 1/2” section.
2 Voice Display The Voice Display allows you to easily check which Voices are being used for each keyboard. It also allows you to set whether the Voice for each section sounds or not by changing the On/Off status in the display. How to call up the Voice Display: 2 Voices Pressing the [VOICE DISPLAY] button in the DISPLAY SELECT section selects the Voice Display. (The Voice Display always appears when the Electone is turned on.
When Voice section 1 is selected ([VOICE SECTION 2] button is off) Upper Keyboard Voice 1 Lead Voice 1 Lower Keyboard Voice 1 Pedal Voice 1 2 Voices From this display, you can check which Voices have been selected for Voice section 1 on each keyboard (Upper Keyboard Voice 1, Lead Voice 1, Lower Keyboard Voice 1 and Pedal Voice 1).
3 Selecting Voices with the Voice buttons Since selection of Voices follows the same procedure throughout all Voice sections, instructions for only the Upper Keyboard Voice 1 of the Voice section 1 are given here. For details on how to select a Voice of Voice section 2, see page 37. Selecting Voices for Voice section 1 Make sure that the lamp of the [VOICE SECTION 2] button is off.
3 2 Select the Voice in the Voice menu display by rotating the DATA CONTROL dial. You can also select by pressing the [A]/[D] buttons. Voices Now go on to select voices for the Lower keyboard and Pedalboard as you did for the Upper keyboard above. Adjusting the Voice volume There are two ways to set the Voice volume: using the Volume buttons on the panel and setting the volume in the display.
Pressing a Voice button once calls up the Voice Menu display for the selected button. Pressing it a second time calls up the Voice Condition display. Successive presses alternate between the two displays. Voice Menu Display Voices 2 Voice Condition Display From the Voice Condition display, you can control Voice-related parameters such as Pan, Effect, Volume, and so on. For more information on the Voice Condition display, see page 53.
4 Selecting a Voice for Voice section 2 This feature lets you blend two Voices together—Voice section 1 with a different Voice in Voice section 2. This is useful for creating rich textures in the sound, playing the two Voices in a layer. For details on how to select a Voice for Voice section 1, see page 33. The instructions below explain how to selecting a Voice (Upper Keyboard Voice 2) for Voice section 2.
Selecting Voices for Voice Section 2 Since selection of Voices for Voice section 2 follows the same procedure throughout all Keyboard sections, instructions for only the Upper Keyboard, Upper Keyboard Voice 2, are given here. 1 Make sure that the lamp of the [VOICE SECTION 2] button is lit. If the [VOICE SECTION 2] lamp is off, press the [VOICE SECTION 2] button to turn the lamp on, and select Voice section 2.
4 Press one of the Volume buttons of the UPPER KEYBOARD VOICE 1/2 section on the panel to increase the Volume level for the Upper Keyboard Voice 2. 2 Voices Since the default Volume level for Voice section 2 is set to minimum, the Upper Keyboard Voice 2, Lead Voice 2, Lower Keyboard Voice 2 and Pedal Voice 2 will produce no sound even after you select the Voices for Voice section 2.
NOTE About the Solo function The [TO LOWERD/SOLO] button functions as Solo when the [VOICE SECTION 2] button lights up, and function as TO LOWER when the [VOICE SECTION 2] is off. 2 Voices The ELS series Electone features an exclusive Solo function letting you instantly switch to a solo Lead Voice in the middle of your performance, muting all other Upper Keyboard Voices. This Electone can playback Songs containing the Solo function by using the MDR function.
For example, select Pedal Voice “5: Contrabass 5” for User button [1] in Upper Keyboard Voice 1. 1 Make sure that the lamp of [Voice section 2] is off. If the [Voice section 2] lamp is lit, press the [VOICE SECTION 2] button to turn the lamp off, and select Voice section 1. Lamp is off, indicating that you can select a Voice for Voice section 1. 2 Voices 2 Press one of the User buttons in any of the Voice sections (in this case, User button [1] in Upper Keyboard Voice 1 section).
Directly selecting the category To directly select the desired category, hold down one of the User buttons and simultaneously press the desired Voice button. 1. While holding down the User button... Voices 2 2. Press the Voice button. 4 Select “5: CONTRABASS 5” by using the DATA CONTROL dial. Now you’ve assigned Contrabass 5 to be called up by User button [1] in Upper Keyboard Voice 1. You can set voices to the User buttons in any other Voice sections just as you did for Upper keyboard Voice 1 above.
6 Voice List This list describes the preset Voices. • Super Articulation Voices Voices having the prefix “S-” at the beginning of the name. For details on the effects that are produced by playing the Super Articulation Voices, refer to the Description column. “AEM” is the trademark of Yamaha’s leading-edge tone generation technology.
Category No. CONTRABASS 01 Contrabass 1 02 Contrabass 2 03 Contrabass 3 04 Contrabass 4 05 Contrabass 5 06 Contrabass 6 07 Pizzicato Bass 1 08 Pizzicato Bass 2 09 Acoustic Bass 1 10 Acoustic Bass 2 These acoustic bass sounds are ideal for jazz. This instrument is also known as “standup bass” and “upright bass.” Description These sounds are used for the lowest pitched parts. Variations range from deep to solo-type sounds. These are the sounds of contrabass being plucked by finger.
Category BRASS/ TRUMPET WOODWIND/ FLUTE 2 Voices TUTTI 44 No. Voice Name Description 53 Tuba 1 This instrument is meant to be played in the lower octaves and has a rich, stable sound that supports brass band and orchestra. It has a wide expressive range, and is often used in playing humorous phrases. 54 Tuba 2 55 Euphonium This instrument features a characteristically broad and deep — even noble — sound, and is frequently used as a solo instrument.
CHOIR PAD No. Voice Name 09 Brass & Sax 1 10 Brass & Sax 2 11 Brass & Sax 3 Description This is a brass section and sax ensemble. 12 Brass & Winds This is a brass section and woodwind ensemble. 13 Orchestra Hit 1 14 Orchestra Hit 2 These are popular, widely used sampled sounds in which the many instruments of the orchestra play together on one chord or note. They are used for dramatic hits and accents. 01 Choir 1 These are vocal chorus sounds.
Category SYNTH 2 Voices 46 No. Voice Name Description 01 Synth Lead 1 These special synth sounds are designed for solo parts and lead lines. Included is a synth Voice that has a strong layered fourth interval below the main pitch.
ORGAN No. Voice Name 60 Synth Strs 1 61 Synth Strs 2 62 Synth Strs 3 63 Synth Strs 4 64 Synth Strs 5 65 Synth Strs 6 66 Synth Strs 7 67 Synth Strs 8 68 Synth Strs 9 69 Synth Strs 10 Description These are spacious synth strings sounds. 70 Light SynStrings This is a useful synth strings sound. 71 FatSynStrings This is a fat synth strings sound. 72 Oct SynStrings 1 These are synth strings played in octaves.
Category ORGAN 2 Voices PIANO GUITAR 48 No. 35 Voice Name Description Vin Organ Slow 1 These vintage organ sounds feature a rotary speaker at slow speed. 36 Vin Organ Slow 2 37 VintageOrganFast This vintage organ sound features a rotary speaker at fast speed. 38 Pop Organ 1 These are multi-purpose organ sounds.
PERCUSSION No. Voice Name Description 08 Steel Guitar 1 These sounds are acoustic guitar with steel strings. 09 Steel Guitar 2 10 S-Steel Guitar 1 *2 This is a Super Articulation Voice that features hammering or slides only if you play an accented legato note that is between a minor 2nd and a perfect 4th above the current note. When you release a key, the noise caused by fingers touching and muting strings is reproduced. Natural sounds can be simulated through legato playing.
Category TIMPANI ELECTRIC BASS 2 Voices SYNTH BASS WORLD 50 No. Voice Name Description 01 Timpani 1 02 Timpani 2 This dramatic sounding percussion instrument is unlike most drums in that it produces a definite pitch. It adds extra power and dynamic impact when played in unison with other instruments and plays a very important role in orchestral music. 03 Timpani Roll 1 These are timpani sounds played with a drum roll technique.
No. Voice Name Description 14 Ma Tou Qin This two-stringed bowed instrument has been passed down through generations by Mongolian nomads. It is also known as the “horse-headed violin,” and features a strong yet sometimes delicate tone. 15 Di Zi This is a Chinese flute. It features a unique sound produced by the vibration of a thinly stretched membrane. 16 Suo Na This double-reed instrument is similar to an oboe, and features a joyful sound.
3 Voice Controls and Effects The Electone is equipped with two general kinds of functions that can be used to change the sound of the Voices: Voice Controls and Effects. Each Voice has been given certain factory-preset effect settings to best enhance its sound. However, if you wish, you can change the sound to suit your preferences by using the controls and effects described in this section. All built-in effects are digital.
Selecting from the Voice Condition 1 display To call up the Voice Condition display: Choose a Voice on the panel, then press the same button on the panel again. The Voice Condition display appears. Voice Condition Display Voice Controls and Effects 3 Currently selected page Each voice group’s Voice Condition (except for Lead Voice) consists of five display pages. Voice Condition of the Lead Voice consists of six pages.
Voice Condition [Page 1] 1 2 3 4 In this display, you can adjust the basic Voice controls, including volume and reverb send level. 3 1 Volume Fine adjustment of the Voice volume. See page 34 for more information. Voice Controls and Effects Reference Page Reverb Depth (page 61) 2 Reverb Determines the amount of reverb applied to each Voice section. When the Reverb Depth setting in the Reverb display is set to the minimum, the setting here will have no effect. See page 61 for details.
Voice Condition [Page 2] Press the Page buttons to select Page 2. 1 2 3 4 When the Pedal Voice is selected When the Pedal Voice is selected, the Initial Touch, After Touch and Touch Vibrato values are displayed in parentheses. Although you cannot use these functions with the Pedal Voices on the Pedalboard, you can use them with the Pedal Voices on the Lower Keyboard when you turn the To Lower function to on (page 38).
Voice Condition [Page 3] Press the Page buttons to select Page 3. 1 Vibrato 3 The Vibrato function varies the level of the Voices, making them sound warmer and more animated. This effect is applied independently to each Voice section. For some Voices, vibrato may not be effective at all or the effect may not sound as expected. Vibrato Control Speed Delay Depth Voice Controls and Effects 1 Preset/User Toggles between PRESET and USER.
Voice Condition [Page 4] Press the Page buttons to select Page 4. Effect Category 1 2 3 4 Effect 3 You can select the effects applied to each Voice section. PRESET The effect type that best matches and is most suited to the currently selected sound is automatically selected. REVERB Produces a gentle “wash” of aftertones in the sound, recreating the subtle ambience and depth of actual performance spaces and rooms. DELAY Produces delayed distinct repeats of the sound, or echoes.
Reference Page Effect List (page 64) 2 Effect Type Effect types are displayed corresponding to the selected effect category. Effect Parameters You can set the parameters of effect type in 3 and 4 below. Generally, the effect parameters settings are optimally balanced for the selected effect type, so there is no need to follow the steps below unless you want to change the setting. If you want to change the setting, select the parameter in 3, then change the value in 4.
Voice Condition [Page 6] (only for Lead Voice) Press the Page buttons to select Page 6. 1 2 3 4 In this Page, you can set whether or not the Slide function/Auto Articulation function is applied to the Lead Voice, and how the monophonic Lead Voice 2 responds to your polyphonic playing (with Last or Top mode). NOTE Voice Controls and Effects 1 Slide On/Off Slide applies a portamento effect to notes played in legato. The Slide function is effective within a one-octave range for the Lead Voice.
Rotary Speaker 1 Select “Rotary Speaker” as the effect category. Select “Rotary Speaker” here 3 Voice Controls and Effects 2 Set the Speed Control to on, then adjust the rotating speed and mode of the Rotary Speaker. Speed Control, Speed and Mode settings are specified in the Rotary Speaker display. The Rotary Speaker display can be called up from Page 3 of the Utility display.
Once the Rotary Speaker effect has been turned on and set, you can control the effect in real time from the panel (in UTILITY) or conveniently from the Left Footswitch. 3 Control the Rotary Speaker effect from the panel or from the Left Footswitch. You can control Rotary Speaker on/off not only from the panel (Speed Control parameter in UTILITY, Page 3), but also by using the Left Footswitch, if the Footswitch has been properly assigned. See “4 Rotary Speaker” on page 180 for details.
NOTE Depending on the reverb depth value (set in the Reverb display), two adjacent REVERB button lamps may be lit at the same time, indicating an intermediate position. Reference Page The amount of reverb applied to each Voice section (page 54) Reference Page Changing the rhythm volume/reverb (page 74) 3 Reference Page Effect List (page 64) 1 Depth Determines the depth of reverberation or the level of the reflected sounds. Coarse reverb depth settings are made with the panel REVERB buttons.
Sustain The sustain effect, selectable for the Upper, Lower and Pedal Voices, causes Voices to gradually fade out when the keys are released. The sustain on/off and sustain length settings are independent for each keyboard, providing maximum expressive control. The Sustain effect is not applied to the Lead Voices. Press one of the SUSTAIN buttons, located to the left of the panel, to set the sustain. The SUSTAIN display appears.
3 Effect List EFFECT TYPE Description REVERB HALL 1 TEMPO CROSS1 Tempo-synchronized cross delay. TEMPO CROSS2 HALL 3 TEMPO CROSS3 HALL M TEMPO CROSS4 HALL L ER/KARAOKE XG HALL 1 ER 1 XG HALL 2 ER 2 ROOM 2 Reverb simulating the acoustics of a room. ROOM 3 GATE REVERB1 GATE REVERB2 Isolates only the early reflection components of the reverb. Creates a unique, powerful effect by cutting short the reverberation of a deep reverb. REVERS GATE Simulates gated reverb played back in reverse.
Description Simulates an analog flanger. Irregular LFO waveforms can also be selected. TEMP FLANGER Tempo-synchronized flanger. DYNA FLANGER Enables the delay time of the flanger to respond dynamically to the input level. VIN FLANGER1 Simulates an analog flanger, with a deep vintage sound. VIN FLANGER2 AMB FLANGER PHASER 2 Periodically modulates the phase to add modulation to the sound.
EFFECT TYPE EFFECT TYPE B LGND D CLN British stack amp simulator with crunch sound settings. XG CMP+OD+DL Compressor, Overdrive and Delay connected in series. US CMB TWIN Simulates an American combo amp. USCMB RCH CL V_DIST H+DLY V Distortion Hard and Delay connected in series. V_DIST S+DLY V Distortion Soft and Delay connected in series. DIST+T DLY Distortion and Tempo Delay connected in series. JZ CMB WARM ODRV+T DLY Overdrive and Tempo Delay connected in series.
Description EFFECT TYPE Description VOICE CANCEL Attenuates the vocal part of a CD or other source. TALKING MOD Adds a vowel sound to the input signal. LO-FI Degrades the audio quality of the input signal. DYNA FILTER Enables the filter cutoff frequency to respond dynamically to the input level. DYNA RINGMOD Enables the ring modulator to respond dynamically to the input level. RING MOD An effect that modifies the pitch by applying amplitude modulation to the high frequency of the input.
4 Rhythm/Keyboard Percussion Rhythm/Keyboard Percussion This Electone features hundreds different real rhythms featuring actual drum and percussion sampled sounds. Automatic Accompaniment functions are used with the rhythms, providing appropriate and completely automatic accompaniment to match the style of the selected rhythm. Moreover, the Electone has a Keyboard Percussion feature that allows you to directly play drum and percussion sounds from the Upper/Lower keyboards and Pedalboard.
2 Select the Rhythm in the Rhythm Menu display by rotating the DATA CONTROL dial. You can also select by pressing the [A]/[D] buttons. Here, we’ve selected “12: Dancefloor.” 3 Press the [START] button to immediately start the rhythm. Reference Page Operating the rhythm from the panel (page 71) Reference Page 4 Rhythm/Keyboard Percussion Accompaniment (page 79) To stop the rhythm, press this button again.
Rhythm Structure Each rhythm is made up of “sections.” Since each section is a variation of the basic rhythm, you can use them to add “spice” to your performance and mix up the beats while you are playing. You can freely change the section while the rhythm is played back. INTRO This is used for the beginning of the song. There are three Intro sections that can be selected with INTRO [1] – [3] buttons. When the Intro finishes playing, the rhythm automatically shifts to the Main section.
Operating the rhythm from the panel You can turn the rhythm on/off and switch the sections as desired by pressing the buttons on the panel. Using the Fill Ins and Break patterns let you add dynamic interest and “spice” to your performance. To start/stop the rhythm: START The rhythm begins as soon as the [START] button is pressed. To stop the rhythm, press the button again.
To switch the rhythm sections: You can change the rhythm section of the Main phrase by pressing the desired MAIN/FILL IN [A] – [D] button. The selected section’s lamp (above the button) lights. To use the Fill In patterns: As you play the Electone along with the rhythm, occasionally press the selected MAIN/FILL button as desired. The Fill In pattern (one measure) will be played and the selected Fill In section’s lamp (above the button) flashes.
Adjusting the tempo You can adjust the rhythm tempo by pressing the TEMPO buttons. Tempo 1 2 Bar/Beat Lights up at the first beat in the bar during the playback of the Rhythm. 4 Bar (measure) Beat Rhythm/Keyboard Percussion 1 TEMPO buttons For adjusting the speed of the rhythm. Pressing the right button increases the tempo and pressing the left button decreases it. Each rhythm has its original (preset) tempo.
Changing the rhythm volume/reverb You can adjust the rhythm volume or amount of reverb applied to the rhythms and the percussion sounds used in the rhythms in the Rhythm Condition display. You can also have a Fill In play automatically by setting the Auto Fill function to ON in Display Page 4. To call up the Rhythm Condition display, select the desired rhythm and press the same rhythm button again.
2 Selecting rhythms from the User buttons As with the Voice sections, the Rhythm section also has User buttons (numbered 1 or 2) from which rhythms can be selected. You can select original User rhythms that have been created with this Electone or other models equipped with the Rhythm Pattern Program function (such as the ELS series). For details on selecting original User rhythms, see next page.
3 Select the “25: Modern Shuffle” rhythm with the DATA CONTROL dial. This step assigns “25: Modern Shuffle” to the User button [1]. You can call up the “25: Modern Shuffle” the next time you press the [1] button. To call up a User rhythm User rhythms created on other Electones that have Rhythm Pattern Programming functions, such as the ELS series, can be selected and played from the User buttons in the panel Rhythm section.
3 Rhythm List This list shows all available rhythms on the Electone.
4 22 Salsa 04 8Beat Modern 15 ChartRockShuffle 18 Disco Fox 23 Montuno 05 16Beat Ballad 1 16 Chart Piano Shfl 19 Disco Philly 24 Calypso 06 16Beat Ballad 2 17 Beach Rock 20 Disco Teens 1 25 Danzon 07 6/8 Slow Rock 18 Surf Rock 21 Disco Teens 2 26 Bomba 08 Schlager 6/8 19 60s Rock 22 Disco Chocolate 27 Pop Latin 09 Big Rock Ballad 20 70s Rock 23 Saturday Night *1 Rhythm/Keyboard Percussion 28 Beguine 10 90s Rock Ballad 21 80s Power Rock 24 90s Disco
4 Accompaniment The Accompaniment function provides arpeggiated chords and other instrumental embellishments when rhythms are used. To use the accompaniment parts, you’ll need to make appropriate settings in the Rhythm Condition display. 1 Select the desired rhythm and press the same button on the panel again. The Rhythm Condition display appears. Rhythm Condition Display 2 Rhythm/Keyboard Percussion 4 Turn the desired parts on.
Chord 1/Chord 2 These are the rhythmic chord backing parts. Pad This part features sustained chords and commonly uses lush sounds, such as strings and organ. Phrase 1/Phrase 2 These parts are used for various embellishments and riffs that enhance the song, such as brass section accents and chord arpeggios. Not all parts contain accompaniment data. Some parts may be empty depending on the selected rhythm and rhythm section. Main Drum and Add Drum contains the drum and percussion rhythm patterns.
To adjust the volume and amount of reverb applied to the Accompaniment: Make settings in Page 1 of the Rhythm Condition display. 2 Select the desired rhythm and then press the same rhythm button on the panel again. The Rhythm Condition display appears. Reference Page Rhythm Condition display (page 74) Use the Page buttons to select Page 1. [Page 1] Rhythm Condition Display 4 1 2 Rhythm/Keyboard Percussion 1 Determine the reverb and volume settings.
Automatic Accompaniment—Auto Bass 5 Chord (A.B.C.) The Auto Bass Chord (A.B.C.) function works with the Rhythm section of the Electone to automatically produce bass accompaniment as you play. It adds an entirely new dimension to your performance by effectively putting a full backing band at your disposal. There are three modes used for producing Automatic Accompaniment patterns. You can select the desired mode in the A.B.C./M.O.C. display. To set the A.B.C. function: 1 4 Press the [A.B.C./M.O.C.
1 Off Cancels the Auto Bass Chord function. 2 Single Finger NOTE You can produce major, minor, 7th, and minor 7th chords by simply using one, or at most, two or three fingers to play the chords. The Single Finger mode provides the fastest and easiest means to obtain many different chord/bass combinations. The chord produced will sound in the same octave regardless of where it is played on the Lower keyboard. When the A.B.C.
Memory The Memory function is a convenient performance tool in the A.B.C. features that makes playing with the accompaniment even smoother and more fluid. It is available separately for both the Lower keyboard and Pedalboard. To use it, turn Memory on, start the rhythm and play chords and bass notes according to the selected A.B.C. mode. With Memory on, the accompaniment continues to play, even when you release your fingers (and foot).
6 Melody On Chord (M.O.C.) The Melody On Chord (M.O.C.) feature automatically adds a harmony part to the melodies you play on the Upper keyboard. The harmony is derived from the chords you play on the Lower keyboard—or from the chords that are played for you, if you use Automatic Accompaniment. To set the M.O.C. function: 1 Press the [A.B.C./M.O.C.] button. The A.B.C./M.O.C. display appears. A.B.C./M.O.C. Display 2 Rhythm/Keyboard Percussion 4 Turn the M.O.C. on.
Rhythm Sequence Rhythm Sequence lets you create your own rhythm compositions, connecting together any of the Electone’s existing rhythms as well as original rhythms created on other Electones that have the Rhythm Sequence Program function (such as the ELS series). Although this Electone does not have the full Rhythm Sequence Program function, you can load four rhythm compositions to Sequence numbers [SEQ.1]—[SEQ.4] buttons on the panel for future recall, using the steps below.
4 Press the desired sequence numbers [SEQ.1]—[SEQ.4] buttons to turn them on (the respective lamps light). NOTE Sequence numbers [SEQ.1]—[SEQ.4] buttons can be turned on at the same time. Press the [START] button in the Rhythm section to play back the rhythm sequence. Only those sequences set to on can be played. Two or more rhythm sequences can be played back in succession in numeric order. The SEQ. lamp goes out when the sequence assigned to it is finished playing.
7 Keyboard Percussion The Keyboard Percussion function provides many different drum and percussion sounds, playable from the keyboards and Pedalboard. Keyboard Percussion has two different modes, Preset and User. Preset Keyboard Percussion lets you play the preset drum kit sounds from the keyboards (assigned beforehand to the keys), while the User Keyboard Percussion lets you freely assign the drum sounds to any key or pedal you wish.
4 Play some notes on the keyboards and/or Pedalboard. For details of percussion assignments for each kit, see the “Preset Keyboard Percussion List” on page 90. Changing the Keyboard Percussion volume/reverb Reference Page Recalling the User Keyboard Percussion (page 104) NOTE The Keyboard Percussion volume and reverb settings made here are commonly applied to both Keyboard Percussion 1 and 2. 1 2 1 Volume Determines the Keyboard Percussion volume.
Preset Keyboard Percussion List Indicates the drum/percussion sounds and their key assignments.
– – – – – – – – – – – – Bongo H Bongo L Conga H Mute Conga H Open Conga L Timbale H Timbale L Agogo H Agogo L Cabasa Maracas Samba Whistle H Samba Whistle L Guiro Short Guiro Long Claves Wood Block H Wood Block L Cuica Mute Cuica Open Triangle Mute Triangle Open Shaker Jingle Bells Bell Tree – – – – – – – – – – – – Standard Kit 1 Preset 1 (LK) – Surdo Mute Surdo Open Hi Q Whip Slap Scratch H Scratch L Finger Snap Click Noise Metronome Click Metronome Bell Seq Click L Seq Click H Brush Tap Brush Swirl Brush
Preset 1 (UK) – – – – – – – – – – – – 4 Rhythm/Keyboard Percussion Bongo H Bongo L Conga H Mute Conga H Open Conga L Timbale H Timbale L Agogo H Agogo L Cabasa Maracas Samba Whistle H Samba Whistle L Guiro Short Guiro Long Claves Wood Block H Wood Block L Cuica Mute Cuica Open Triangle Mute Triangle Open Shaker Jingle Bells Bell Tree – – – – – – – – – – – – Hit Kit Preset 1 (LK) – Surdo Mute Surdo Open Hi Q Whip Slap Scratch H Scratch L Finger Snap Click Noise Metronome Click Metronome Bell Seq Click L
– – – – – – – – – – – – Bongo H Bongo L Conga H Mute Conga H Open Conga L Timbale H Timbale L Agogo H Agogo L Cabasa Maracas Samba Whistle H Samba Whistle L Guiro Short Guiro Long Claves Wood Block H Wood Block L Cuica Mute Cuica Open Triangle Mute Triangle Open Shaker Jingle Bells Bell Tree – – – – – – – – – – – – Rock Kit Preset 1 (LK) – Surdo Mute Surdo Open Hi Q Whip Slap Scratch H Scratch L Finger Snap Click Noise Metronome Click Metronome Bell Seq Click L Seq Click H Brush Tap Brush Swirl Brush Slap
Preset 1 (UK) – – – – – – – – – – – – 4 Rhythm/Keyboard Percussion Bongo H Bongo L Conga Analog H Conga Analog M Conga Analog L Timbale H Timbale L Agogo H Agogo L Cabasa Maracas 2 Samba Whistle H Samba Whistle L Guiro Short Guiro Long Claves 2 Wood Block H Wood Block L Scratch H 2 Scratch L 2 Triangle Mute Triangle Open Shaker Jingle Bells Bell Tree – – – – – – – – – – – – Analog Kit Preset 1 (LK) – Surdo Mute Surdo Open Hi Q Whip Slap Scratch H Scratch L Finger Snap Click Noise Metronome Click Metrono
– – – – – – – – – – – – Bongo H Bongo L Conga H Mute Conga H Open Conga L Timbale H Timbale L Agogo H Agogo L Cabasa Maracas Samba Whistle H Samba Whistle L Guiro Short Guiro Long Claves Wood Block H Wood Block L Cuica Mute Cuica Open Triangle Mute Triangle Open Shaker Jingle Bells Bell Tree – – – – – – – – – – – – Jazz Kit Preset 1 (LK) – Surdo Mute Surdo Open Hi Q Whip Slap Scratch H Scratch L Finger Snap Click Noise Metronome Click Metronome Bell Seq Click L Seq Click H Brush Tap Brush Swirl Brush Slap
Preset 1 (UK) – – – – – – – – – – – – 4 Rhythm/Keyboard Percussion Bongo H Bongo L Conga H Mute Conga H Open Conga L Timbale H Timbale L Agogo H Agogo L Cabasa Maracas Samba Whistle H Samba Whistle L Guiro Short Guiro Long Claves Wood Block H Wood Block L Cuica Mute Cuica Open Triangle Mute Triangle Open Shaker Jingle Bells Bell Tree – – – – – – – – – – – – Symphony Kit Preset 1 (LK) – Surdo Mute Surdo Open Hi Q Whip Slap Scratch H Scratch L Finger Snap Click Noise Metronome Click Metronome Bell Seq Cli
House Kit Preset 1 (LK) – – – – – – – – – – – – – Bongo H Open 1 F Bongo L Open 3 F Conga H Tip Conga H SlapOpen Conga H Open 2 Timbale H Timbale L Agogo H Agogo L Cabasa Maracas Slur 2 Vox Drum L Vox Drum H Guiro Short Guiro Long Claves Wood Block H Wood Block L Cuica H Cuica L Triangle Mute Triangle Open Analog Shaker Sleigh Bells Wind Chime Snare Break Roll Noise Burst Vox Bell Snare R&B 1 Vox Alk Udu High Filter Kick – – – – – W Kick Disco Fx WhiteNoiseDown 1 PinkNoise Down 1 WhiteNoiseDown 2 PinkNois
Preset 1 (UK) – – – – – – – – – – – – – – – – – – – – – – – – Phone Call Door Squeak Door Slam Scratch Cut Scratch Split Wind Chime Telephone Ring – – – – – – – – – CarEngn Ignition Car Tires Squeal Car Passing Car Crash Siren Train Jet Plane Starship – – – – – – – – – – – – – 4 SFX Kit 2 Preset 1 (LK) Rhythm/Keyboard Percussion Burst Roller Coaster Submarine – – – – – Laugh Scream Punch Heart Beat Foot Steps – – – – – – – – – – – Machine Gun Laser Gun Explosion Firework – – – – – – – – – Preset 2 (P
Pop Latin Kit Preset 1 (LK) – – – – – – – – – – – – – Cowbell Top Cowbell 1 Cowbell 2 Cowbell 3 Guiro Short Guiro Long MetalGuiro Short Metal Guiro Long Tambourine Tambourim Open Tambourim Mute Tambourim Tip Maracas Shaker Cabasa Cuica Mute Cuica Open Cowbell High 1 Cowbell High 2 Shekere Shekere Tone Triangle Mute Triangle Open – Wind Chime – – – – – – – – – – – – Cajon Low Cajon Slap Cajon Tip Claves High Claves Low Hand Clap – Finger Snap Castanet Conga H Tip Conga H Heel Conga H Open Conga H Mute Cong
Preset 1 (UK) China Kit Preset 1 (LK) – – – – – – – – – – – – – – – – – – – – – – – 4 Rhythm/Keyboard Percussion Ban Bangu Roll ChineseOperaVo 1 ChineseOperaVo 2 ChineseOperaVo 3 Yunluo F Yunluo F# Yunluo G Yunluo G# Yunluo A Yunluo A# Yunluo B Yunluo C Yunluo C# Yunluo D Yunluo D# Yunluo E Yunluo High F Yunluo High F# Yunluo High G Yunluo High G# Yunluo High A Yunluo High A# Yunluo High B Yunluo High C – – – – – – – – – – – – Da Cha 2 Da Gu mp Da Gu Rim Da Gu f Da Gu Hand Da Gu Roll Pai Gu 4 Pai Gu 4
Assigning sounds to the User Keyboard Percussion You can assign any desired drum and percussion sound to any key or pedal, and your original setups can be saved to eight memory locations: User 1 through User 40. The User setting saved in the User memory location can be called up by using the Keyboard Percussion [1] or [2] buttons. In the instructions below, drum sounds are assigned to User 1 and called up with Keyboard Percussion [1] button.
4 Use the Page buttons to select the ASSIGN Page. In this Page, you can assign specific drum sounds to any of the keys. 1 2 3 4 1 Category This allows you to select the desired percussion category using the [A] buttons. Refer to the “Kit Assign List” on page 105. 2 Instrument Names The individual instruments are shown in the display and can be selected with the [B] button. Refer to the “Kit Assign List” on page 105.
To assign an instrument to a particular key or pedal. Simultaneously hold down the Data Control button [C] corresponding to “ASS.”(Assign) and press the key (or pedal) to which the instrument is to be assigned. The currently displayed instrument will be assigned to the key you press down as a part of User 1. 7-1. 7-2. While holding down [C] button... NOTE Though 40 User Keyboard Percussion setups can be created, they cannot be memorized to Registration Memory.
To erase all instruments: You can clear all assignments in ASSIGN Page of the Keyboard Percussion display. 1 Press, then release the [D] “CLR.” (CLEAR) button in the display. The following display appears, prompting confirmation of the operation. You can cancel the operation at this point by pressing the [D] button corresponding to “CANCEL.” 4 2 Rhythm/Keyboard Percussion Press the [C] “CLR.” (Clear) button to erase all data.
Kit Assign List CYMBAL Crash Cymbal 1 Crash Cymbal 2 Crash Cym Mute Ride Cymbal 1 Ride Cymbal 2 Ride Cymbal Cup Orchestra Cymbal Orch Cymbal Roll Orch Cymbal Mute Cymbal March Cym Brush Shot Tam-Tam HI-HAT Hi-Hat Open Hi-Hat Closed Hi-Hat Pedal 1 Hi-Hat Pedal 2 Analog HH Open Analog HH Closed SNARE DRUM Snare Drum Light Snare Drum Heavy Snare Drum Rim 1 Snare Drum Rim 2 SD Accent 1 SD Accent 2 SD Reverb 1 SD Reverb 2 Synth Snare Drum Orch Snare Drum Snar
Conga L Conga H Mute Bongo H Bongo L Timbale H Timbale L Cowbell Claves Guiro Long Guiro Short Maracas Vibraslap TOM Hi-Hat Pedal Tom Room 1 Tom Room 2 Tom Room 3 Tom Room 4 Tom Room 5 Tom Room 6 SNARE DRUM Tambourine Castanet Jingle Bells Bell Tree Triangle Open Triangle Mute Wood Block H Wood Block L Sticks Whip Slap Finger Snap Hand Clap PERCUSSION 2 PERCUSSION 4 Tambourine Light Castanet Jingle Bells Bell Tree Triangle Open Triangle Mute Wood Block H Wood Block L Sticks Whip Slap Finger Snap Han
CYMBAL Crash Cymbal 1 Crash Cymbal 2 Splash Cymbal Chinese Cymbal Ride Cymbal 1 Ride Cymbal 2 Ride Cymbal Cup Hi-Hat Open Hi-Hat Closed Hi-Hat Pedal Hand Clap PERCUSSION 3 Vibraslap Analog PERCUSSION 4 Tambourine Hi Q 2 Jingle Bells Bell Tree Triangle Open Triangle Mute Wood Block H Wood Block L Sticks Whip Slap Finger Snap Hand Clap PERCUSSION 2 PERCUSSION 4 Tambourine Anlg Hi Q 2 Jingle Bells Bell Tree Triangle Open Triangle Mute Dance Perc 3 Dance Perc 4 Snare Dance 1 Whip Slap Finger Snap Dance
PERCUSSION 1 Brush Tap Swirl Conga H Open Conga L Conga H Mute Bongo H Bongo L Timbale H Timbale L Cowbell Claves Guiro Long Guiro Short Maracas Vibraslap TOM PERCUSSION 2 Surdo Mute Surdo Open Cuica Mute Cuica Open Cabasa Shaker Agogo H Agogo L Samba Whistle H Samba Whistle L 4 PERCUSSION 3 Tom Brush 1 Tom Brush 2 Tom Brush 3 Tom Brush 4 Tom Brush 5 Tom Brush 6 BASS DRUM Kick Jazz Kick Tight Kick Soft PERCUSSION 1 Conga H Open Conga L Conga H Mute Bongo H Bongo L Timbale H Timbale L Cowbell Claves
PERCUSSION 4 Hi Q Click Noise Scratch H Scratch L Seq Click L Seq Click H Metronome Click Metronome Bell House Kit CYMBAL Crash Cymbal T9 Crash Cymbal 1 Crash Cymbal 4 Splash Cymbal 2 Ride Cymbal T9 Ride Cymbal 3 RideCymbal Cup 2 Hi-Hat Open T9 Hi-Hat Closed T8 Hi-Hat Pedal T9 SNARE DRUM Snare T9 1 Snare T9 2 Snare T9 3 Snare T9 5 Snare T9 Gate Snare T9 Rim Snare T8 1 Snare T8 5 Snare T8 Rim Snare Garg L Snare R&B 1 Snare Roll Snare Break Roll TOM Tom T9 1 Tom T9 2 Tom T9 3 Tom T9 4 Tom T9 5 Tom T9 6 BA
Cowbell High 2 Claves High Claves Low Guiro Long Guiro Short Metal Guiro Long MetalGuiro Short PERCUSSION 2 Maracas Cuica Open Cuica Mute Cabasa Shaker Tambourine Tambourim Tip Tambourim Open Tambourim Mute Castanet Triangle Open Triangle Mute Wind Chime PERCUSSION 3 Hand Clap Finger Snap Shekere Shekere Tone Cajon Low Cajon Slap Cajon Tip 4 CYMBAL/SNARE DRUM Crash Cymbal 1 Crash Cymbal 2 Ride Cymbal 1 Hi-Hat Open Hi-Hat Closed Hi-Hat Pedal Snare Drum Snare Soft Side Stick TOM/BASS DRUM Floor Tom L Flo
5 Registration Memory Registration Memory is a powerful performance tool that helps you sound like a professional player. It lets you store virtually all the settings you make on the panel and LCD, conveniently allowing you to instantly change all Voice settings and rhythms while you’re playing—simply by pressing a single Registration Memory button. The buttons are conveniently located at the top right on the panel for easy access while playing.
To store Registrations 9 – 16 Although this Electone has just eight Registration Memory buttons, up to sixteen Registrations can be stored by turning on the [9-16] button to make the numbered buttons function as 9 – 16. To restore to the 1-8, turn off the [9-16] button. Then, in both cases, all you have to do is simply press the desired numbered button while holding down the [MEMORY] button as described in step 2.
2 Selecting Registrations Simply press the numbered button that corresponds to the Registration you wish to select. (The selected button’s LED lights.) To call up one of the Registrations 9 – 16, turn on the [9-16] button, then press the appropriate numbered button. Example: Calling up Registration Number 11 2. Press the appropriate button Registration Memory 1. Turn on the [9-16] button...
NOTE The Disable function is available even after changing the Bank. Using the [DISABLE] button: Keep in mind that rhythm and automatic accompaniment patterns as well as the tempo also change when you select different Registration Memory buttons. There may be times during your performance when you want to keep the same rhythm going, even when you make Registration Memory changes.
3 Use the Page buttons to select Page 1. Press the [B] button to set DISABLE MODE to “NORMAL” or “TEMPO.” NORMAL When the Disable Mode is set to Normal and the [DISABLE] button is on, the following functions will not change, even when you change the Registration Memory number. • Rhythm menu, Rhythm section, Rhythm tempo, Rhythm volume, Rhythm reverb • Rhythm reverb time • Accompaniment volume, Accompaniment reverb, On/Off status of Accompaniment parts • A.B.C. mode, A.B.C. memory • M.O.C.
3 Storing Registrations to Another Bank Registration Memory and Banks The ELB-02 series lets you create up to five Registration Banks A – E, each of which consists of 1 – 16 Registration Memories. Although preset various Registrations are stored to the Number buttons 1 – 16 of only Bank A by default, you can replace them with your original Registrations. Your original Registrations can be stored also to Banks B – E, up to a maximum of 80 Registrations.
To store the Registration: NOTE 3 When you try to store Registrations after changing the Bank, a confirmation dialog appears. Confirm whether or not you want to set the current Bank as the destination. If you want to set the current Bank as the destination, press the [C] “OK” button, or press the [D] “CANCEL” button to cancel the operation. Create your original Registration, then store it to any of the Number buttons 1 – 16. (This corresponds to steps 1 – 2 on page 111.
Saving the Registration Data to USB 5 Flash Drive Reference Page What is a Song? (page 134) Reference Page Compatible USB flash drives (page 127) The Registration data stored to the Number buttons can be saved to a USB flash drive connected to the [USB TO DEVICE] terminal. For details about the save operation, see Chapter 6, Music Data Recorder (MDR). The instructions below explain how to save the Registration data to a USB flash drive.
5 6 Press the [D] “UNIT” button. The UNIT EDIT display appears. Press the [B] “SAVE” button. A message appears, indicating the Registration data is currently being saved. When the operation is completed, the message closes and the Song name and the Unit number will be shown in the display. The Registration data stored to Banks A – E is now saved as a Unit to the USB flash drive. Song name Registration Memory 5 Unit number 7 Reference Page Press the [D] “EXIT” button.
6 Initializing Registration Memory NOTE Deleting Banks (page 117) Deleting all Registration data in Registration Memory initializes the Registration Memory and restores the original factory-programmed Registration Memory presets. Be careful when using this operation, since it erases all your existing data. In order to avoid inadvertently losing your important data, save it to a USB flash drive. If you want to delete a specific Bank, see “Deleting Banks” on page 117.
7 Registration Shift The Registration Shift function conveniently allows you to change Registrations without needing to take your hands from the keyboards. By using the Right Footswitch on the expression pedal, you can “jump” to a specified Registration or step through the panel Registrations in sequence, either in numeric order or in any order you specify. Registration Shift has four modes: Off, Shift, Jump and User. These are set in the REGIST SHIFT (RIGHT) display.
4 Registration Shift has three modes: Shift, Jump and User. These are set in the REGIST SHIFT (RIGHT) display by successive pressing of the [A] button. Select each in order (Off Shift Jump User). 1 OFF 2 SHIFT 3 JUMP 4 USER 1 Off Turns off the Registration Shift assignment. When Off is selected, Registrations cannot be changed by using the Right Footswitch. 2 Shift In the Shift mode, each press of the Right Footswitch selects the Registration Memory presets in their numerical order.
3 Jump NOTE Pressing the Right Footswitch jumps to select the designated panel Registration. Press the [B] button to select the Jump destination. In the Jump mode, the Right Footswitch cannot call up another Registration Bank. You can confirm the actual Registration Shift in Page 2. Bank Current Registration Registration number of the destination 5 Registration Memory 4 User In the User mode, each press of the Right Footswitch selects Registrations according to the order you’ve specified.
2 Call up Page 2 of the REGIST SHIFT (RIGHT) display. [Page 2] REGIST SHIFT (RIGHT) Display Enter the Registration Number NOTE To select the Registration from another Bank, select desired Bank in the Page 3 of the VOICE display (page 116). To go back to the REGIST SHIFT (RIGHT) display, press the [FOOT SWITCH] button. 3 Press the desired numbered button in the Registration Memory section. If you want to use 9 – 16 Registrations, turn on the [9-16] button, then press the desired numbered button.
6 7 Repeat steps 1 through 4 above to set additional numbers in the Registration order. Up to 400 steps with 80 Registrations (16 Registrations x 5 Banks) can be memorized. After settings, move the cursor to the top position with DATA CONTROL dial, then press the Right Footswitch as you play the Electone. Each press of the Right Footswitch selects Registrations according to the order you’ve specified.
Shift End: Determines the end point for the Registration Shift function. Press the Page buttons to select Page 1. Press the [B] button to select the item, then use the DATA CONTROL dial to change the setting. 1 STOP 2 TOP 3 NEXT UNIT 1 Stop Selects the last Registration and quits the operation. 5 2 Top After the last preset is reached, “Top” is called up, returning operation to the beginning. To select the first preset, press the Right Footswitch.
6 Music Data Recorder (MDR) The Music Data Recorder (MDR) is a sophisticated recording system built into the Electone that lets you record your performances and Registration settings to a USB flash drive. Moreover, the MDR allows you to perform various other operations to your Song data (such as copy, delete and convert). Compatible USB flash drives Please make sure to use one of the compatible USB flash drives listed in the Compatible USB Device List downloadable from the Yamaha website: http://download.
2 Using the MDR Display The MDR display consists of seven display Pages. Each Page is devoted to a specific function, and you can call up the desired function or operation by selecting the appropriate Page. For example, first select the SONG Page to select a target Song, then select TOOLS1 Page to copy/convert/delete the Song, or TEMPO Page to set the Repeat playback setting for the Song. To select the desired Page, use Page buttons at the top right of the display on the panel.
SONG Page: 7 1 6 4 5 2 3 1 Current USB Flash Drive/Folder Displays the currently selected USB flash drive or folder. The contents included in 1 are listed as 2 below. 2 USB Flash Drive/Folder/Song List Displays the USB flash drive, folders or Songs. 3 Scroll bar If the USB flash drive/folder/Song list contains more than 5 USB flash drive/folders/ Songs, you can scroll through the display with the DATA CONTROL dial. 4 UP Selects the higher layer folder or USB flash drive by pressing the [A] button.
If Songs cannot be found: 1 2 Check the current USB flash drive/ folder (page 129 1). If the desired Song is stored in the currently displayed folder, use the DATA CONTROL dial to display and select the Song. If the desired Song is stored in a different folder, use the DATA CONTROL dial and the [A] “ ” and [B] “ ” buttons to select the folder in which the desired Song is stored. Song icons These icons are shown when you select a USB flash drive, folder, and Song.
Media (USB flash drive) Contents: Folders, Songs, and Files Folders: A folder is a storage location in the media, used to organize multiple Songs in groups. If you've saved hundreds of Songs to a USB flash drive, it may be difficult to find the desired Song quickly. Organizing your Songs in folders, with similar Songs grouped together (for example, according to genre or tempo), makes it easier to find the Songs you want.
Connecting a USB Device You can connect a USB flash drive (sold separately) or a USB wireless LAN adaptor (sold separately) to the [USB TO DEVICE] terminal. You can save data you’ve created on the instrument to the USB flash drive (pages 118, 147), or you can connect the instrument to a smart device such as iPad via wireless LAN (page 192). Precautions when using the [USB TO DEVICE] terminal This instrument features a built-in [USB TO DEVICE] terminal.
3 Formatting a USB Flash Drive If you find that you are unable to use a new, blank USB flash drive or an old one that has been used with other devices, you may need to format it. Formatting erases all the data in the USB flash drive and makes it ready to record. The data erased by formatting will be lost permanently. Check whether or not the USB flash drive contains any important data you wish to keep before executing the operation. Proceed with caution, especially when connecting multiple USB flash drives.
5 NOTICE Never attempt to disconnect the USB flash drive or turn the power off during formatting. Doing so may corrupt the USB flash drive data. 6 Press the [D] “FORMAT” button in the display. A message appears prompting confirmation of operation. You can cancel the operation at this point by pressing the [D] “CANCEL” button. Press the [C] “FORMAT” button to format the USB flash drive. When the operation is completed, the LCD returns to SONG Page.
2 Select the desired USB flash drive. Reference Page If USB flash drive cannot be found: (page 129) NOTE If two (or more) USB flash drives are connected, which of them is labeled USB 01 or USB 02 may change when you turn on the power to the instrument. If a single USB flash drive is connected, only USB 01 will be displayed. After that, if you connect another USB flash drive, the latter one will be displayed as USB 02.
Reference Page Playback Settings • Playing Back the Selected Part(s) (page 157) Pressing the [C] “SET.” button in the SONG Page of the MDR display while the Song is selected calls up a display of the currently selected Song, letting you confirm the tempo/ repeat settings (TEMPO Page) or parts that are played when playing the Song (PART Pages). These Pages can be switched by pressing the Page buttons in the order: TEMPO PART 1 PART 2 PART 3.
Here is the actual procedure again, in linear form: 1 Press the [B] button corresponding to the “ ” in the display to call up the folder/Songs list in the selected USB flash drive. FOLDER_001, FOLDER_002 and SONG_001 are displayed. 2 Select FOLDER_002 by turning the DATA CONTROL dial. 3 Press the [B] button to call up the song in the FOLDER_002. 6 4 Music Data Recorder (MDR) In this case, already “Twinkle Twinkle Little Star” is selected.
5 Recording MDR Recording This lets you record your performance as a Song to a USB flash drive. A Song is comprised of your keyboard performance information and is not a recording of the actual sound itself. The performance information refers to which keys are played, at what timing, and at what strength — just as in a musical score. Based on the recorded performance information, the tone generator of the Electone outputs the corresponding sound.
4 5 6 7 Press the [PLAY/PAUSE] button at the top left on the panel to start the recording. The lamp of the [PLAY/PAUSE] button lights up and a small indicator flashes across from left to right at the bottom left of the LCD display. This indicates that Registration data is currently being saved as a Unit to the Song. Reference Page Unit (page 119) After “00:00” appears at the bottom left of the LCD display, begin playing. When you finish playing, press the [STOP] button.
Re-recording (Retry) NOTE After exiting from the recording mode, you can rerecord your performance using the same Registration. 1 Select the Song you want to re-record. After selecting the Song, select the TOOL1 Page with the Page buttons, then press the [B] “DELETE” button. A message appears prompting confirmation of operation. Press the [C] “PERF. ONLY” (Performance Only) button to delete only the performance data.
3 Select the parts for recording. In this case, set the Lower Keyboard (LOWER) and Pedalboard (PEDAL) to “RECORD,” while other parts to “OFF.” PART 1 Page PART 2 Page Each press of the [A] – [C] button corresponding to the desired part in the display toggles the status among PLAY, OFF and RECORD. Turn off the parts you don’t want to record, and make sure “PLAY” is selected for the parts you want to play and “RECORD” for the part you want to record.
If you want to change the part tempo for ease in recording, perform steps 8 and 9; otherwise, skip to step 10. 8 9 Select the TEMPO Page with the Page buttons. Change the playback tempo, if desired. The playback tempo can be set over a range of 50% to 200% of the original. The original recorded tempo is 100%; values less than 100% result in a slower tempo while values greater than 100% result in a faster tempo. Use the [A] button to select the item, then use the DATA CONTROL dial to change the tempo.
Punch-in Recording This lets you re-record over a specific phrase or section—either that of a specific part(s) or all parts. 1 Connect the compatible USB flash drive to the [USB TO DEVICE] terminal. NOTE This function is best used when the phrase to be rerecorded has definite beginning and end points, with slight pauses before and after. Reference Page 3 4 5 6 7 8 Press the [MDR] button, then select the Song which contains the phrase you want to change.
6 Changing the Song/Folder Name NOTE However, Song names of ELseries Electones, such as the EL-900, cannot be changed. Reference Page Even though the Electone automatically assigns a generic name to each recorded Song, it’s best to give each Song a “meaningful” name, such as an original title or even a date indicating when it was recorded. 1 Compatible USB flash drives (page 127) 2 3 Connect the compatible USB flash drive to the [USB TO DEVICE] terminal.
5 Move the cursor to the desired point by using the [A] buttons. Pressing the [A] button moves the cursor one step to the right, and holding moves the cursor to the right continuously. When the cursor reaches to the end of the name, it will return to the beginning of the name. Cursor Change the character at the cursor position. Replace the current character at the cursor by using the DATA CONTROL dial. Turn it clockwise to select the characters in order, and counter-clockwise for reverse order.
NOTE An XG Song name can contain up to 46 characters. 7 8 9 Repeat steps 5 through step 6 above to finish entering the Song name. Up to 50 characters can be entered. After finishing, press the [D] “EXIT” button. A message appears prompting confirmation of operation. You can cancel the operation at this point by pressing the [D] “CANCEL” button. To actually enter the change, press the [C] “CHANGE” button. The renamed Song/folder is displayed.
7 Saving Registrations You can also record Registration Memory data and other created data, separate from performance recording, as listed below. The data will be saved to a Unit of the selected Song.
4 5 Press the [D] “UNIT” button to call up the UNIT EDIT display. “NEW UNIT” (blank Unit) is selected. Press the [B] “SAVE” button. A message appears, indicating that the Registration data is currently being saved. After the message disappears, the Unit to which the Registration is recorded is automatically named “UNIT 1,” and “SONG XXX” (XXX: number) is assigned as Song name to the destination Song.
3 Press the [PLAY/PAUSE] button to record the Registrations, then press the [STOP] button before the “00:00” indication is shown at the bottom left of the display. This is the same procedure as the one shown when you start recording. The “00:00” at the bottom left of the display indicates that the MDR is recording the Registrations and being set up for normal recording; pressing the [STOP] button interrupts this process.
4 Press the [D] “UNIT” button to call up the UNIT EDIT display. In the display, the Registration Unit list of the current Song is shown, such as “UNIT 1” and “UNIT 2.” Reference Page Files (page 131) 5 6 NOTE 6 Music Data Recorder (MDR) When playing back an EL Song (created on the EL series, such as EL-900) which uses the Next Song function, the Unit data in the next Song will be loaded.
Overwriting Registration data to a Unit This operation lets you replace just the Registration Unit without changing the performance data in already recorded Song data. 1 2 3 4 First make all the desired settings you want to save to the new Registration. Connect the compatible USB flash drive to the [USB TO DEVICE] terminal. Press the [MDR] button, and then select the desired Song containing the Registration you wish to replace.
Deleting Registrations This function lets you delete the Registration Unit saved to a Song. 1 2 3 Connect the compatible USB flash drive to the [USB TO DEVICE] terminal. Press the [MDR] button, then select the Song containing the Registrations you wish to delete. For details on selecting a song, see steps 2 and 3 on page 135. Press the [D] “UNIT” button to call up the UNIT EDIT display.
Next Unit Settings (using more than 80 Registrations in one performance) You’ve learned in an earlier section that by using 5 Bank of 16 Registrations, you can program a maximum of 400 settings to be recalled in a specified order, with the Regist Shift function described on page 123. When playing back a Song which uses more than 80 Registration numbers, you can have two or more Registration Units saved to a single Song and recall them one by one as you play the Song.
7 8 NOTICE When you record a Song using the Next Unit function, make sure to load the top Registration Unit (UNIT 1) to the Electone by pressing the [PLAY/ PAUSE] button after selecting the desired song. If you begin the recording procedure instead by pressing the [RECORD] button, even as another Unit (UNIT 2, etc.) is loading, a message “The data currently loaded in the instrument is that of Unit xx. Are you sure you want to save the data to Unit 1?” will be shown.
3 Press the [D] “UNIT” button to call up the UNIT EDIT display. In the display, the Registration Unit list of the current Song is shown, such as “UNIT 1” and “UNIT 2.” 5 6 7 Select the Registration Unit number you want to load by using the DATA CONTROL dial. Press the [A] “LOAD” button. A message appears prompting confirmation of the operation. You can cancel the operation at this point by pressing the [D] “CANCEL” button. Press the [C] “LOAD” button.
Reference Page Next Unit Settings (using more than 80 Registrations in one performance) (page 153) 3 NOTE Registration data is generally not included in most Song data, such as commercially available XG Songs created on instruments other than the Electone. Press the [PLAY/PAUSE] button to start playback. A “-----” mark appears at the bottom left of the display, indicating the Registration data is currently being loaded when the Song contains the Registration data.
Playing Back Selected Parts You can also play back selected parts of your recorded performance, while other parts are temporarily turned off. This function is especially useful for playing a single part, such as the melody, over previously recorded accompaniment parts. To play back the selected part(s): Before or during playback, use the [A] – [C] buttons to turn the parts you want to play back to “PLAY” and the parts you want to mute to “OFF.
Changing the Tempo You can change the tempo of the Song as the Song is playing in the MDR display, either while the Song is stopped or while it is playing. Since the procedure for changing the tempo is differ depends on whether the Song has an icon or not, confirm if the desired Song has an icon or not. icon is included: You can change the tempo in the following procedure.
Repeat Playback This feature allows you to repeatedly play back either all Songs on a folder or only one specific Song. 2 3 Press the [MDR] button, then select the Song you wish to repeatedly play back. If you wish to play back all Songs on a folder, select the first Song that will be played back. For details on selecting a Song or folder, see steps 2 and 3 on page 135. Press the [C] “SET.” button, then press the Page buttons to select the TEMPO Page.
4 Press the [PLAY/PAUSE] button to begin playback. To cancel the repeat setting, select “OFF” for the repeat mode. Playing Back XG Songs Reference Page Converting to XG format (page 166) The Electone allows you to playback XG Song data, created on the computer or converted from Electone Song format to XG format. Naturally, you can use the fast forward, rewind and pause controls, just as with Songs (performances) recorded on the Electone.
10 Other Operations — Copy, Delete, etc. The TOOLS Pages in the MDR display has many functions, such as Song copy, Song delete, confirming the Song size, etc., as well as creating or deleting folders. Copy This function lets you copy a folder/Song, or even a USB flash drive. You can copy and exchange the data even between two different USB flash drives. (For Songs created on EL-series instruments, such as the EL-900, cannot be copied.
5 Reference Page About Protected Songs (page 163) NOTE • If the USB flash drive copy operation is executed, the folder name “#MEDIA” will be created in the destination folder. About Copying Protected Songs Protected Original Songs or Protected Edit Songs can be copied as long as you select the same folder that contains the source Protected Song as the destination. If you select another folder/drive, the message “Song xx will be moved.” will be displayed.
About Protected Songs If you buy or download Song data, it may be protected from being deleted (to prevent accidental erasure) or from being copied (to protect copyright ownership). These are called “Protected Songs.” A Protected Song can be played back in the same way as Songs you’ve created, but it cannot be converted to XG format. Registration data in the Protected Song cannot be edited, nor can the performance data be overwritten.
NOTICE If the folder you are deleting contains audio files, deleting the folder deletes all the audio files as well as Songs in the folder. Use of separate USB flash drives — one for Songs, one for audio files — is highly recommended for data protection. However, at very least, you should use separate folders. Song Delete/Folder Delete These operations let you delete Songs and folders. (Only Songs created with the ELseries, such as the EL-900, cannot be deleted.
Creating folders 2 Connect a compatible USB flash drive to the [USB TO DEVICE] terminal. Press the [MDR] button, then select the media/folder within which you want to create the new folder. For details on selecting a Song/folder, see steps 2 and 3 on page 135. 3 Press the [B] button to open the media/folder. 4 Call up the TOOLS1 Page with the Page buttons. 5 6 Reference Page Compatible USB flash drives (page 127) 6 Press the [D] “CREATE FOLDER” button.
Converting to XG format This function allows you to convert ELB-02 Song data to XG format data. You can play back the data using XG devices. The converted XG Song data may not sound the same as the original data. Make sure to check the remaining memory of the destination media in advance. If memory space is insufficient, the Convert operation is not available. Protected Songs cannot be converted to XG format.
7 8 After the CONVERT TO display is called up for selecting the convert destination, select the destination of the converted data. Select the USB flash drive or folder as the destination. See steps 2 and 3 on page 135 for instructions on selecting the destination. NOTE Press the [C] “EXE.” button to start conversion. A message will appear, prompting confirmation of the converted data, and the converted Song is played back. The song converted to XG format is automatically named such as “XGSONG001.
Checking the Remaining Memory When a USB flash drive is selected on the TOOLS2 Page, pressing the [INFORMATION] button calls up a display indicating the remaining memory in the USB flash drive. When a Song is selected on the TOOLS2 page, pressing the [INFORMATION] button calls up a display indicating the data size, amount of Registration Banks, Song title, composer of the Song, etc. The indicated items differ depending on what is selected.
7 Audio The convenient [AUDIO] button allows you to play back audio files (.WAV) saved to a USB flash drive. Moreover, since you can record your performances and recordings as audio data (.WAV) to a USB flash drive, it is possible to play back the files on computer, share them with your friends, and record your own CDs to enjoy as well.
Try recording your performance as an audio file to a USB flash drive. Maximum amount of recording time is 60 minutes per recording, though this may be less depending on the capacity of the particular USB flash drive. NOTE The file extension does not appear in the Electone display. However, it can be viewed on a computer. Reference Page Compatible USB flash drives (page 169) NOTE Songs you've created on the Electone will not be shown in the AUDIO Display even when the USB flash drive contains Songs.
5 Start recording by pressing the [C] “RECORD” button, and then start your performance. When recording begins, the elapsed recording time is shown in the lower left of the AUDIO RECORD display. Once the elapsed recording time is shown, you can load the Registration or play the Song with the MDR. NOTICE Never attempt to disconnect the USB flash drive or turn the power off during recording. Doing so may corrupt the USB flash drive data or the recording data.
2 Playing Back Audio Files NOTE This instrument cannot play back DRM protected files. Reference Page Compatible USB flash drives (page 169) NOTE Songs you've recorded using the MDR function on this Electone and Protected Songs will not be shown in the AUDIO Display, even when the USB flash drive contains Songs. NOTE The “new audio” file is a blank audio file automatically created in the USB flash drive/folder, if the number of the audio files in the USB flash drive/folder is less than 120.
4 Press the [C] “PLAY” button to call up the PLAY Page of the AUDIO PLAY display. Select the PLAY Page with the page buttons if another page is shown. AUDIO PLAY Display [PLAY Page] 5 6 NOTE AUDIO PLAY display consists of two different pages: “PLAY” or “SET.” (Setting). Use the Page buttons to select the appropriate page. Press the [C] “PLAY” button to start playback. When playback begins, the elapsed time is shown in the lower left of the display. Press the [D] “FINISH” button to stop playback.
Changing the Volume, Tempo and Pitch You can change the volume, tempo and pitch of the audio file as the file is playing. Reference Page Compatible USB flash drives (page 169) 1 2 3 4 Connect the compatible USB flash drive to the [USB TO DEVICE] terminal. Press the [AUDIO] button. Select the desired audio file for playback. Since the operation for selecting audio files is the same as that for Songs, refer to steps 2 and 3 on page 135.
1 To adjust the Volume: Press the [A] button to select “VOLUME,” then adjust the value by using the DATA CONTROL dial or by successively pressing the [A] button. Range: 0 – 127 2 To Change the Tempo: NOTE Press the [B] button to select “TEMPO,” then adjust the value by using the DATA CONTROL dial or by successively pressing the [B] button. The value can be adjusted from 75% to 125% and the default value is 100%. Higher values result in a faster tempo.
Deleting the File / Changing the File Name You can delete the file or change the file name. Reference Page Compatible USB flash drives (page 169) 1 2 3 4 Connect the compatible USB flash drive containing the audio files to the [USB TO DEVICE] terminal. Press the [AUDIO] button. Select the desired audio file. Since the operation for selecting audio files is the same as that for Songs, refer to steps 2 and 3 on page 135.
8 Footswitches These leg- and foot-operated controls allow you to execute various performance functions and switch the effects on/off, without needing to take your hands from the keyboard. The Electone has two Footswitches on the expression pedal. Left Footswitch Right Footswitch Expression Pedal 1 Right Footswitch The Right Footswitch is used for the Registration Shift function. For details on the Registration Shift function and Right Footswitch, see “Registration Shift” on page 121.
2 Call up the FOOT SWITCH (LEFT) display. Use the page buttons to select page 3. FOOT SWITCH (LEFT) Display 1 OFF 2 RHYTHM 3 GLIDE 4 ROTARY SPEAKER Reference Page Rhythm Structure (page 70) In this page, you can assign which function the Left Footswitch will control: Rhythm, Glide, or Rotary Speaker. Each press of the [A] button selects the functions in sequence: Off Rhythm Glide Rotary Speaker. When Off is selected here, the Left Footswitch is inactive.
2 - 3 Main A – Main D These functions correspond to the MAIN/FILL IN [A] – [D] buttons on the panel. For example, when “MAIN A” is selected in this display and you press the Left Footswitch, the rhythm section is switched to Main A or Fill In A. 2 - 4 Intro 1 – Intro 3 These functions correspond to the INTRO [1] – [3] buttons on the panel. For example, when “INTRO1” is selected in this display and you press the Left Footswitch, the rhythm section is switched to Intro 1.
Reference Page Rotary Speaker (page 60) 8 Footswitches 180 ELB-02 Owner’s Manual 4 Rotary Speaker You can control the Rotary Speaker effect (on/off) by using the Left Footswitch. When the “ROTARY SPEAKER” is selected in this display and you press the Footswitch, the Rotary Speaker effect is switched on or off. This function corresponds to the “Speed Control” in the Rotary Speaker display. To use this function, you’ll need to make the appropriate Rotary Speaker settings for each Voice section.
9 Transpose and Pitch Controls There are two pitch-related controls on the Electone: Transpose and Pitch. Transpose allows you to change the key of the instrument and Pitch lets you finely adjust the tuning. Transpose and Pitch can be adjusted in the Utility display. 1 2 Press the [UTILITY] button. The Utility display appears. Select Page 2 of the Utility display by pressing the Page buttons. 1 2 In this page, you can change the Transpose and Pitch settings.
10 Connections On the underside and right side of the Electone keyboard is a separate panel equipped with various input/output terminals and miscellaneous controls, the functions of which are described below. 1 Accessory Jacks and Controls This section provides brief explanations for each jack/control on the Electone. For details on connecting to external devices, see page 184.
4 4 [USB TO DEVICE] terminal For connecting a USB flash drive. You can save data you’ve created on the instrument to the USB flash drive. You can also use this to connect a USB wireless LAN adaptor (sold separately) for connecting the instrument to an iPhone/iPad via wireless LAN. 5 6 Reference Page • Connecting a USB Device (page 132) • Connecting to an iPhone/ iPad (page 192) 7 Front (keyboard side) 5 MIDI [IN]/[OUT] terminals For connecting external MIDI devices such a synthesizer or sequencer.
CAUTION Before connecting the instrument to other electronic components, turn off the power of all the components. Also, before turning any components on or off, make sure to set all volume levels to minimum (0). Otherwise, electrical shock or damage to the components may occur. NOTICE To avoid damage to the devices, first turn on the power to the instrument, then to the external device. When turning off the power, first turn off the power to the external device, then to the instrument.
Controlling External MIDI Devices from the Electone You can use the Electone to remotely play the Voices of a MIDI keyboard (or tone generator), combining them with the Electone and letting you create even richer, more multi-layered sound textures. (The MIDI receive channels of the MIDI keyboard must match the transmit channels on your Electone.
3 Connection with Computer NOTE When you are using the MDR, MIDI data cannot be transferred to/from the computer. By using the [USB TO HOST] terminal or MIDI terminals, you can connect the Electone and computer enabling the MIDI communication between both. Install the USB-MIDI driver to your computer, then make the MIDI connection between the Electone and computer. Regarding the USB-MIDI driver, you can download the latest version from the Yamaha website: http://download.yamaha.
4 MIDI This section explains what MIDI is, and what it can do, as well as how you can use MIDI on your Electone. What is MIDI? No doubt you have heard the terms “acoustic instrument” and “digital instrument.” In the world today, these are the two main categories of instruments. Let’s consider a grand piano and a classical guitar as representative acoustic instruments. They are easy to understand.
MIDI (Musical Instrument Digital Interface) allows electronic musical instruments to communicate with each other, by sending and receiving compatible Note, Control Change, Program Change and various other types of MIDI data, or messages. MIDI Messages of the Electone MIDI messages can be divided into two groups: the Channel Messages and System Messages. Channel Messages consist of data related to the performance on the keyboard for a specific channel.
MIDI Channels MIDI data is assigned to one of sixteen MIDI channels. Using these channels, 1 – 16, the performance data for sixteen different instrument parts can be simultaneously sent over one MIDI cable. Think of the MIDI channels as TV channels. Each TV station transmits its broadcasts over a specific channel.
5 MIDI Control When you connect your Electone with a second MIDI device (such as a synthesizer or computer), you can determine how the Electone controls that MIDI device, or how the Electone is controlled. To select the MIDI page: 1 2 Press the [UTILITY] button. The Utility display appears. The MIDI Pages are found on Pages 4 – 5. Use the PAGE buttons to select Pages 4 – 5.
3 Expression Determines the control of the expression pedal functions. Ordinarily, this control is set to Auto. Successive presses of the [C] button alternate among Auto, Internal and External. Auto: Internal and External is automatically switched. Internal: You can manually control the expression pedal even during MDR. playback. External: While playing the MDR or receiving MIDI messages, the expression pedal has no effect.
6 Connecting to an iPhone/iPad NOTE Yamaha website address is on page 9 in this Owner’s Manual. You can connect a smart device such as an iPhone or iPad to the instrument. By using an application tool on your smart device, you can take advantage of convenient functions and get more enjoyment out of this instrument. For details on connections, refer to the “iPhone/iPad Connection Manual” on the website (page 9).
2 Connect the USB wireless LAN adaptor, then call up the Wireless LAN display. Press the [UTILITY] button, then use the Page buttons to select Page 6. WIRELESS LAN Display 3 4 Press the [B] “WPS” button. A message appears prompting confirmation of operation. You can cancel the operation at this point by pressing the [D] “CANCEL” button. Press the [C] “OK” button to start WPS setup, then press the WPS button on your access point within two minutes.
Displaying available networks in the wireless LAN and connecting to a network 1 2 Set the Wireless LAN mode to “INFRASTRUCTURE.” Refer to “Wireless LAN Mode” on page 197. Connect the USB wireless LAN adaptor, then call up the Wireless LAN display. Press the [UTILITY] button, then use the Page buttons to select Page 6. WIRELESS LAN Display Network list 3 4 Press the [A] “UPDATE” button to call up the network list. For a network with a lock icon ( ), you need to enter the proper password.
5 After connection between the instrument and the access point is done successfully, connect the iPhone/iPad to the access point by referring to the “iPhone/iPad Connection Manual.” Manual Setup 1 2 Set the Wireless LAN mode to “INFRASTRUCTURE.” Refer to “Wireless LAN Mode” on page 197. Connect the USB wireless LAN adaptor, then call up the Wireless LAN display. Press the [UTILITY] button, then use the Page buttons to select Page 6.
4 Set the SSID, Security and Password to the same as the settings on the access point. 1 SSID Press the [A] button on page 1 to call up the display for SSID input, then enter the SSID. For details on how to enter the characters, refer to “Changing the Song/Folder Name” on page 144. Up to 32 characters (half size), alphanumeric characters, marks can be entered. After entering the SSID, press the [D] “EXIT” button to finalize the setting.
Wireless LAN Mode 1 Connect the USB wireless LAN adaptor, then call up the Wireless LAN option display. Press the [UTILITY] button, then use the Page buttons to select Page 7. The currently selected Mode name is shown. Mode Set the Wireless LAN mode. You can set between two modes: INFRASTRUCTURE and ADHOC. Press the [B] “MODE CHANGE” button to call up a message prompting confirmation of the operation, then press the [C] “OK” button to execute the operation.
Wireless LAN Detailed Settings Reference Page Wireless LAN Mode (page 197) You can set the detailed settings for each mode: INFRASTRUCTURE and ADHOC. No need to change or set the settings if you’ve done the connection between iPhone/ iPad and instrument.
As necessary, set the detailed settings. Press the [A] – [D] buttons corresponding to “CHANGE” or “SHOW” in the display to call up the display for Setting/Input. Wireless LAN mode INFRASTRUCTURE mode Display DETAIL display Page 1 DETAIL display Page 2 ADHOC mode ADHOC display Page 1 Item Default setting Setting/Input ON Determines whether or not DHCP is used. If your router is compatible with DHCP, select “ON (set DNS automatically)” here.
Initialize the wireless LAN settings Factory Set (page 27) does not affect the settings of the wireless LAN settings, which can be initialized by the following procedure. Be careful when executing initialize, since it erases all the wireless LAN settings and replaces them with the factory defaults. 1 2 10 Connections 200 ELB-02 Owner’s Manual Press the [UTILITY] button to call up the UTILITY display, then select Page 7 by using the Page buttons.
Glossary of Terms Access point A device which acts as a base station when transmitting data by wireless LAN. Some access points are combined with modem functions. Ad Hoc mode Communication method for performing data communication with the terminal and other devices directly without using a relay device, such as an access point of a wireless LAN.
11 Appendix Assembly Instructions CAUTION • Assemble the unit on a hard and flat floor with ample space. • Be careful not to confuse or misplace the parts, and be sure to install all parts in the correct orientation. Please assemble the unit in accordance with the sequence described here. • Assembly should be carried out by at least two persons. • Be sure to use only the included screws of the specified sizes. Do not use any other screws.
3 Mount the Sideboards onto the Pedalboard unit. 4-3 Be sure not to confuse the Right and Left Sideboards. 3-1 3-2 3-3 Untie (at three points) and straighten out the bundled pedal cord. Raise the Pedalboard as shown in the illustration below. While holding the Sideboard(s) to the Speaker unit, fasten the four screws (B) from the rear, to secure the Speaker unit to the Sideboards. Cover the four screw holes on the rear side with the corresponding screw caps.
6-2 Use the four screws (A) to fasten the Main unit to the Sideboards as shown in the illustration. 8 Plug the power cord into the AC IN jack on the bottom surface of the main Unit. A 9 Connect the Pedalboard cord and Speaker cord to the Main Unit. Remove the protective film applied to each connector of the cords. Make sure that the latches on each connector of the cords face toward you, and connect them to each socket securely until the latch is set.
11 Place the music rest on the Electone. After completing the assembly, please check the following items. • Are there any parts left over? → Review all assembly procedures. • Is the Electone clear of doors and other movable fixtures? → Move the Electone to an appropriate location. • Does the Electone make a rattling noise when you shake it? → Tighten all screws. • Can the Electone be turned on? → Confirm that the power cord plug is securely connected to an appropriate power outlet.
Troubleshooting Problem Possible Cause and Solution GENERAL OPERATION The sound is not heard for about 10 seconds after turning the power on. This is normal; the Electone takes a while to start up. A click or pop is heard when the power is turned on or off. Electrical current is being applied to the instrument. This is normal. A cracking noise is sometimes heard.
Problem Possible Cause and Solution When too many keys are pressed, not all of the notes sound. Total polyphonic capacity (notes sounding for both Upper and Lower Keyboards) is 10 notes. Only one sound is heard when two notes of the Lead or Pedal Voices are simultaneously played. For practical performance reasons, the Electone has been designed so that only one note of the Lead or Pedal Voices can be played at a time. The Pedal Voices do not sound, even though the volume is properly set.
Problem Recording or playback cannot be performed. Possible Cause and Solution • The part may have been turned off. Turn the desired part to REC or PLAY in the PART 1 and PART 2 Pages. • The performance data is too large. The maximum limit for recording performance data is 1 MB. • The USB flash drive is write-protected. Cancel the write-protect. Recording is stopped before the performance is finished. • The amount of recorded data on the media is close to the maximum limit.
Specifications DIGITAL ORGAN PRODUCT NAME AWM TONE GENERATION Upper: 49 keys (C – C), Lower: 49 keys (C – C), Pedal: 20 keys (C – G) KEYBOARD BASIC (FSB) Initial Touch Upper, Lower After Touch Upper, Lower 601 Registration Menu Registration Memory Shift, Jump, User (1 Unit: 400 steps), Next Unit Registration Shift VOICE Upper 1, Upper 2, Lead 1, Lead 2, Lower 1, Lower 2, Pedal 1, Pedal 2 Voice Sections Voice Buttons Upper/Lower VIOLIN, SYNTH, FLUTE, TRUMPET, USER 1, TO LOWER (Lead 1), SOLO
KEYBOARD PERCUSSION 1 Unit Preset 1 – 2, User 1 – 40 Settings Wonderland Kit, EL Kit, Standard Kit 1, Standard Kit 2, Hit Kit, Room Kit, Rock Kit, Electro Kit, Analog Kit, Dance Kit, Jazz Kit, Brush Kit, Symphony Kit, Live! Studio Kit, House Kit, SFX Kit 1, SFX Kit 2, Noise Kit, Pop Latin Kit, Arabic Kit, China Kit, Orchestra Percussion Kits Yes Assign CONTROLS Footswitch Left Right -6 – +6 Transpose A = 427.2 – 452.
Index Numerics [DISABLE] button ............................... 114 J 1 – 16 (Registration Memory) .............111 Disable mode ..................................... 114 Jacks and Controls ............................ 182 9 – 16 (Registration Memory) .............112 display .................................................. 25 Jump .................................................. 123 Display Language ................................ 27 A [A] – [D] button .....................................
Pedalboard ...........................................30 PHASER .........................................57, 65 S PHONES .............................................182 Scroll bar .............................................. 25 Phrase 1/Phrase 2 ................................80 Selecting a Song ................................ 134 Version ................................................. 28 Shift .................................................... 122 Vibrato ..................................
About Using BSD-Licensed Software The software used by this product includes components that comply with the BSD license. The restrictions placed on users of software released under a typical BSD license are that if they redistribute such software in any form, with or without modification, they must include in the redistribution (1) a disclaimer of liability, (2) the original copyright notice and (3) a list of licensing provisions.
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. MALTA NORTH AMERICA Olimpus Music Ltd. Valletta Road, Mosta MST9010, Malta Tel: +356-2133-2093 CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario M1S 3R1, Canada Tel: +1-416-298-1311 NETHERLANDS/BELGIUM/ LUXEMBOURG U.S.A. Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A.
Yamaha Downloads http://download.yamaha.com/ Manual Development Department © 2016 Yamaha Corporation ZS53040 Published 04/2016 MWZC*.