User Manual

101

ELB-02 Owner’s Manual

Rhythm/Keyboard Percussion



Assigning sounds to the User Keyboard Percussion

You can assign any desired drum and percussion sound to any key or pedal, and

your original setups can be saved to eight memory locations: User 1 through User

40. The User setting saved in the User memory location can be called up by using the

Keyboard Percussion [1] or [2] buttons.

In the instructions below, drum sounds are assigned to User 1 and called up with

Keyboard Percussion [1] button.

1 Turn on the Keyboard Percussion function by pressing the

Keyboard Percussion [1] button.

The KBP display appears.

2 Select “User 1” here.

Press the [A] button to select “User 1.” If another name is shown, select “User 1”

with the DATA CONTROL dial.

This step assigns “User 1” to the Keyboard Percussion [1] button. You can call

up “User 1” the next time you press the [1] button.

3 Select the desired percussion kit.

Press the [B] button to select the item, then use the DATA CONTROL dial to

select the kit. Refer to the “Kit Assign List” on page 105.

NOTE

By default, the same data as

the Preset 1 – 2 of the EL Kit

is stored to User Keyboard

Percussion 1 and 2.

KBP Display