User Manual

6
140
ELB-02 Owner’s Manual
Music Data Recorder (MDR)

Re-recording (Retry)
If you make a mistake during recording, you can simply re-record the song from the
beginning.
1 Press the [RECORD] button while the Song is still running.
This automatically stops recording and returns you to the starting point of the
Song. The lamp of the [PLAY/PAUSE] button starts flashing, indicating that
you can re-record the Song.
2 Press the [PLAY/PAUSE] button.
Re-recording starts from the beginning of the Song and replaces the previously
recorded performance with the newly recorded performance.
3 Press the [STOP] button.

Recording Each Part Separately
You can also record the parts of your performance independently. This function lets
you record Keyboard Percussion and performance control data, such as Registration
changes and expression pedal operation, separately from the other parts of the Song.
Even Keyboard Percussion and Lead Voice 1 can be recorded separately. The
following instruction is an example: First, record the chords and bass to the Song
using the Lower and Pedalboard, and then record the melody using the Upper
Keyboard.
1 Follow steps 1 through 3 on page 138 to call up the Rec Standby
display.
2 Select the Page PART 1 or PART 2 with the Page buttons.
NOTE
After exiting from the
recording mode, you can re-
record your performance
using the same Registration.
1 Select the Song you
want to re-record.
After selecting the Song,
select the TOOL1 Page with
the Page buttons, then
press the [B] “DELETE”
button. A message appears
prompting confirmation of
operation. Press the [C]
“PERF. ONLY”
(Performance Only) button
to delete only the
performance data.
2 Load the Unit of the
Song to the Electone
(page 154).
3 Start recording in the
normal way (and not in
the way described in
“Re-recording” here.
Reference Page
Control data (page 139)