User Manual
Table Of Contents
- PRECAUTIONS
- Congratulations!
- Included Accessories
- About the Manuals
- Contents
- Main Features
- Panel Controls and Terminals
- Quick Introductory Guide
- Basic Operation
- Voices
- Voice Controls and Effects
- Rhythm/Keyboard Percussion
- Registration Memory
- Music Data Recorder (MDR)
- Audio
- Footswitches
- Transpose and Pitch Controls
- Connections
- Appendix
16
ELB-02 Owner’s Manual
Quick Introductory Guide
Connect the plugs of the power cord in the order shown in the illustration.
1
Turn down the [MASTER VOLUME] dial counter-clockwise.
2 Press the [P] (Standby/On) switch to turn the power on.
1
Power Supply
1
2
[AC IN] jack
(page 13)
AC Outlet
The shape of the
plug and outlet
differs depending
on your locale.
WARNING
Use only the supplied
power cord.
CAUTION
When setting up the
product, make sure that
the AC outlet you are using
is easily accessible. If
some trouble or
malfunction occurs,
immediately turn off the
power switch and
disconnect the plug from
the outlet.
NOTE
When disconnecting the
power cord, first turn off the
power, then follow this
procedure in reverse order.
2
Turning On/Off the Power
NOTICE
Do not press any keys or
buttons while turning the
power on. Doing so may
cause the Electone to
malfunction or data loss.