User Manual

17
ELB-02 Owner’s Manual
Quick Introductory Guide
When you turn on the Electone, the following displays will appear one after the
other on the LCD display:
This last display, Voice Display, shows you the currently assigned voice settings
for each Voice section (page 31).
3 Press and hold the [P] (Standby/On) switch for about a second to
turn the power off.
1 Set the MASTER VOLUME control.
The MASTER VOLUME control is an overall control that affects the volume of
the entire instrument.
2 Press the Expression pedal down with your foot.
Once you have set the MASTER VOLUME control to a suitable level, you can
use the Expression pedal to change the volume with your foot as you play.
CAUTION
Even when the [P]
(Standby/On) switch is in
standby status, electricity
is still flowing to the
instrument at the minimum
level. Remove the electric
plug from the outlet when
the instrument is not to be
used for extended periods
of time, or during electrical
storms.
3
Adjusting the Volume
CAUTION
Do not use the instrument
for a long period of time at
a high or uncomfortable
volume level, since this
can cause permanent
hearing loss.
Decreases the volume Increases the volume
Maximum volume Minimum volume