User Manual

7
172
ELB-02 Owner’s Manual
Audio
Try playing back audio files from a USB flash drive connected to this instrument.
File format that can be played back
.wav — 44.1 kHz sample rate, 16-bit resolution, stereo
1 Connect the compatible USB flash drive containing the audio file
to be played back to the [USB TO DEVICE] terminal.
2 Press the [AUDIO] button located at the top right on the panel to
call up the AUDIO display.
3 Select the desired audio file for playback.
To simply play an existing audio file, select the desired audio file (containing
data), referring to the audio file name and icon “ .”
Since the operation for selecting audio files is the same as that for Songs, refer
to steps 2 and 3 on page 135.
2
Playing Back Audio Files
NOTE
This instrument cannot play
back DRM protected files.
Reference Page
Compatible USB flash drives
(page 169)
NOTE
Songs you've recorded
using the MDR function on
this Electone and Protected
Songs will not be shown in
the AUDIO Display, even
when the USB flash drive
contains Songs.
AUDIO Display
NOTE
The “new audio” file is a
blank audio file automatically
created in the USB flash
drive/folder, if the number of
the audio files in the USB
flash drive/folder is less than
120.