User Manual

202
ELB-02 Owner’s Manual
Appendix
1 Open the package, take out the two styrofoam pads from the both sides of the package, and
carefully place the main unit on top of the pads as shown.
2 Take out all parts from the package.
Please confirm that all parts shown in the illustration are provided. When you take out the Speaker Unit, always
hold the bottom of the Speaker Unit, not holding the Grill Net.
Assembly Instructions
CAUTION
• Assemble the unit on a hard and flat floor with ample space.
• Be careful not to confuse or misplace the parts, and be sure to install all parts in the correct orientation. Please
assemble the unit in accordance with the sequence described here.
• Assembly should be carried out by at least two persons.
• Be sure to use only the included screws of the specified sizes. Do not use any other screws. Use of incorrect screws can
cause damage or malfunction of the product.
• Be sure to tighten all screws upon completing assembly of each unit.
• To disassemble the unit, reverse the assembly sequence given below.
Have a Phillips-head (+) screwdriver of the appropriate size ready.
A
B
Music Rest
Main Unit
Sideboard
(Left)
Styrofoam pads
Take out the styrofoam pads, and
place the Main Unit on top of the
pads.
Sideboard
(Right)
Pedalboard UnitSpeaker Unit
Grill Net
Attached to the Speaker
Unit
Bench
Bench Board
Legs: 4 pcs.
Screw caps x 4
Cord holders x 4
Power cord
Dust Cover
Assembly parts
5 x 16 mm x 4
5 x 12 mm x 8
Bundled pedal
cord inside.
11