User Manual

2
ELB-02 Owner’s Manual
31
Voices
The Voice Display allows you to easily check which Voices are being used for each
keyboard. It also allows you to set whether the Voice for each section sounds or not
by changing the On/Off status in the display.
How to call up the Voice Display:
Pressing the [VOICE DISPLAY] button in the DISPLAY SELECT section selects the
Voice Display. (The Voice Display always appears when the Electone is turned on.)
The Voice Display consists of three different pages that can be switched by pressing
the Page buttons at the top right of the display.
The Voice Display shows the Voices currently assigned to each Voice section and
their On/Off status.
On/Off status of the Voices
You can set whether the Voice sounds or not by setting the on/off status in the Voice
display. Press the [A] – [D] buttons corresponding to the Voice section you want to
change to alternate between on and off.
Page 1 and page 2
Each of the keyboards and Pedalboard have two basic Voice sections: Voice section 1
and Voice section 2. To select a Voice, you need to first select the desired Voice
section. For this reason, the Voice Display actually has two separate displays: one for
checking the Voice selected in Voice section 1, and the other for Voice section 2.
Successive presses of the [VOICE SECTION 2] button at the top left on the panel
switch between the Voice sections, and the corresponding display will be shown.
2
Voice Display
Voice Display [Page 1] Voice Display [Page 2]
Voice name On/Off status Voice name On/Off status
Reference Page
Switching between Voice
section 1 and Voice section
2 (page 36)
NOTE
Selecting Page 1 or 2 turns
the [VOICE SECTION 2]
button off or on.