User Manual

2
ELB-02 Owner’s Manual
33
Voices
Since selection of Voices follows the same procedure throughout all Voice sections,
instructions for only the Upper Keyboard Voice 1 of the Voice section 1 are given
here. For details on how to select a Voice of Voice section 2, see page 37.

Selecting Voices for Voice section 1
1 Make sure that the lamp of the [VOICE SECTION 2] button is off.
If the [VOICE SECTION 2] lamp is lit, press the [VOICE SECTION 2] button
to turn the lamp off, and select Voice section 1.
When the [VOICE SECTION 2] lamp is off, you can select a Voice for Voice
section 1 (in this case, the Upper Keyboard Voice 1), from the panel’s UPPER
KEYBOARD VOICE 1/2 section.
2 Press one of the Voice buttons in the UPPER KEYBOARD VOICE 1/
2 section.
For example, if you have pressed the [ORGAN] button, the following display
(Voice Menu) will appear.
The Voice menu contains many Organ Voices, and they will be shown in the
display.
3
Selecting Voices with the Voice buttons
Reference Page
Switching between Voice
section 1 and Voice section
2 (page 36)
Lamp is off, indicating that you can select
a Voice for Voice section 1.