User Manual

2
ELB-02 Owner’s Manual
37
Voices

Selecting Voices for Voice Section 2
Since selection of Voices for Voice section 2 follows the same procedure throughout
all Keyboard sections, instructions for only the Upper Keyboard, Upper Keyboard
Voice 2, are given here.
1 M ake sure that the lamp of the [VOICE SECTION 2] button is lit.
If the [VOICE SECTION 2] lamp is off, press the [VOICE SECTION 2] button
to turn the lamp on, and select Voice section 2.
Now, you can select a Voice for Upper Keyboard Voice 2 from the panel’s
UPPER KEYBOARD VOICE 1/2 section.
2 Press one of the Voice buttons in the UPPER KEYBOARD VOICE
1/2 section.
3 Select the Voice you want to play by using the DATA CONTROL
dial.
Lamp is lit, indicating that you can select
a Voice for Voice section 2.
Indicates Upper Keyboard
Voice 2 is selected.