User Manual

3
55
ELB-02 Owner’s Manual
Voice Controls and Effects
Press the Page buttons to select Page 2.
1 Brilliance
For adjusting the tonal quality of the Voice, making it brighter or warmer. Set the
desired brilliance for each Voice over a range of “-3” (warmest) to “+3” (brightest).
2 Initial Touch
Controls volume and timbre according to the velocity at which you play the keys. The
harder you play the keys, the greater the volume and the brighter the timbre will
become. Higher settings make the change wider. The minimum setting produces no
effect.
Range: 0 – 14
3 After Touch
Controls volume and timbre according to the pressure you apply to the keys after
playing them. The harder you press down on the keys, the greater the volume and the
brighter the timbre will become. Higher settings make the change wider. Minimum
setting produces no effect.
Range: 0 – 14
4 Touch Vibrato
Turns the Touch Vibrato function on or off. Setting Touch Vibrato to on lets you apply
vibrato to individual notes as you play them by after touch. The harder you press down
the key, the greater the vibrato will be. When Touch Vibrato is off, vibrato depth
cannot be controlled, no matter how hard you press the keys.
Voice Condition [Page 2]
1
2
3
4
When the Pedal Voice is selected
When the Pedal Voice is selected, the Initial
Touch, After Touch and Touch Vibrato values
are displayed in parentheses. Although you
cannot use these functions with the Pedal
Voices on the Pedalboard, you can use them
with the Pedal Voices on the Lower Keyboard
when you turn the To Lower function to on
(page 38).
NOTE
Initial Touch may not be
effective on some organ
Voices.
NOTE
After Touch has no effect on
percussive Voices (such as
piano or vibraphone),
percussion sounds, or some
organ Voices.