User Manual

60
ELB-02 Owner’s Manual
Voice Controls and Effects
3

Rotary Speaker
1 Select “Rotary Speaker” as the effect category.
2 Set the Speed Control to on, then adjust the rotating speed and
mode of the Rotary Speaker.
Speed Control, Speed and Mode settings are specified in the Rotary Speaker
display. The Rotary Speaker display can be called up from Page 3 of the Utility
display. Press the [UTILITY] button to call up the Utility display, then select
Page 3 by using the Page buttons. The settings in this display are common to all
Voice sections.
1 Speed Control
Determines the on/off setting of the Rotary Speaker mode. When this is set to on,
rotating speed of the Rotary Speaker becomes fast, and the speed can be set in “2
Speed.” When set to off, the rotating speed of the Rotary Speaker becomes slow or
stops; a slow chorus effect is applied or the Rotary Speaker effect turns off (stops
completely). Slow or Stop can be set in “3 Mode.”
2 Speed
Determines the speed of the speaker rotation.
Press the [B] button to select the “Speed,” then use the DATA CONTROL dial to change
the setting.
Range: 2.69Hz – 39.7Hz
3 Mode
Determines the slow/stop mode when the “Speed Control” is set to off. If Slow is
selected, a slow chorus effect is applied. If Stop is selected, the Rotary Speaker effect
turns off (stops completely).
Pressing the [C] button alternates between slow and stop.
Select “Rotary Speaker” here
1
2
3
Rotary Speaker Display