User Manual
Table Of Contents
- Supported Models
- Supported iOS Devices and iOS
- Yamaha Applications for Piano & Keyboard Instruments
- Contents
- NOTICE
- Information
- Determining the Connection Type
- Connecting the Electone to an Access Point Using a USB Wireless LAN Adaptor (Connection A)
- Connecting Directly Using a USB Wireless LAN Adaptor (Connection B)
- Troubleshooting Problems with Wireless LAN Connections
- Connecting to an iPhone/iPad Using a Cable (Connection C, D, E, F, G, H)
- Glossary of Terms
- About Using BSD-Licensed Software
iPhone/iPad Connection Manual
13
7 Connect the iPhone/iPad to the Electone.
7- 1 Call up the Wi-Fi display on your iPhone/iPad by tapping Settings > Wi-Fi.
7- 2 Turn ON the Wi-Fi.
7- 3 From the network list shown on the display, tap the Electone that you set to Access Point mode or Ad Hoc mode.
If the password is required, input the password, then connect.
8 The connection procedures are completed at step 7. Use the application on your iPhone/iPad
to communicate with your Electone.
NOTE Some applications need appropriate settings to communicate with the Electone. For details, refer to the relevant application
manuals.