User Manual

Other Functions (Tools)
ELC-02/ELCU-M02 Owner’s Manual
135
8
Audio
Other Functions (Tools)
You can delete the file or change the file name.
1 Connect the compatible USB flash drive
containing the audio files to the [USB
TO DEVICE] terminal.
Reference page
• Compatible USB flash drives (page 130)
2 Press the [AUDIO] button.
3 Select the desired audio file.
Since the operation for selecting audio files is the
same as that for Songs, refer to instruction steps 2
and 3 in “Selecting a Song” on page 110.
4 Press the [TOOLS] button at the top
right of the display to call up the TOOLS
Page.
In this page, you can delete or rename the audio file.
To create a ne w folder :
Press the [CREATE FOLDER] button in the display,
then perform the same operation as in the
explanation of “CREATE FOLDER” in “Using the
MDR Display” on page 104 in chapter 7.
To delete the file:
Press the [DELETE] button in the display. A
message appears prompting confirmation of the
operation. You can cancel the operation at this point
by pressing the [CANCEL] button. If you want to
delete the file, press the [DELETE] button in the
display. The audio file will be deleted and the display
returns to the previous display.
To rename the file:
Press the [RENAME] button to call up the
CHANGE NAME display. For details on how to
enter characters, refer to the “Changing the Song
Name” on page 114. You can cancel the operation at
this point by pressing the [CANCEL] button. To
finalize the name, press the [OK] button. The audio
file will be renamed and the display returns to the
AUDIO Page.
To return to the AUDIO Page from the TOOLS Page,
press the [AUDIO] button in the display.
To copy an audio file:
Perform the same operation as in steps 1 – 5 in “Song
copy” on page 124 in chapter 7.
NOTE
• An audio file cannot be copied to the same folder that includes
the source audio file.
• Since copying of an entire folder including audio files cannot be
performed, copy the desired audio files one by one.
• When only one [USB TO DEVICE] terminal is available, an audio
file cannot be copied between different USB flash drives.
To check the remaining memory:
When an Audio file is selected on the TOOLS Page,
pressing the [INFORMATION] button indicates the data
capacity and playback time. When a USB flash drive is
selected on the TOOLS Page, pressing the
[INFORMATION] button indicates the remaining
memory in the USB flash drive.
To initialize (format) a USB flash drive:
Perform the same operation as in steps 3 – 5 in
“Formatting a USB Flash Drive” on page 109 in chapter 7.
Creating a New Folder/Deleting
the File/Changing the File Name
Audio file copy