User Manual

Installing the Music Rest
ELC-02/ELCU-M02 Owner’s Manual
202
Installing the Music Rest
Please confirm that all parts shown in the illustration are
provided.
1 Attach the two music rest brackets to
the rear panel of the Main unit.
Use the inside slots (as shown).
2 Attach the Music rest to the brackets.
Using the Bench (if included)
CAUTION
• Be careful not to get your finger(s) caught while
assembling.
• Always place the chair on a flat, stable surface. Placing
the chair on uneven surfaces may result in it becoming
unstable or overturn, and possibly resulting in injury.
• Keep special watch over any small children, since the
bench is not stable compared to benches of four legs.
1 Place the bench on the floor with the
seating surface face down.
Untie the securing band on the legs, and put the
ends into the pockets on both sides.
2 Pull up the leg slowly.
Music rest brackets x 2 Music rest
Securing
band