User Manual

Using the Bench (if included)

ELC-02/ELCU-M02 Owner’s Manual

203

Appendix

3 Open the legs, then secure one side to

the hooks (as shown), making sure they

are locked in.

4 Turn over the bench as shown in the

illustration.

The lock is at the rear side of the bench.

To keep the stand from teetering, adjust the two

oblong shaped caps (on the side of the lock lever),

rotating them as necessary.

NOTE

When rotating the caps, pull them outward slightly (about

10 mm) for ease in rotating. After making adjustments,

push them back inside.

5 To fold back, put the bench on the floor

with the seating surface face down.

6 Press the lock lever downward, then

press the leg not having the lock, then

release the hooks while closing the

legs.

7 Reverse the sequence of steps 1 – 2 to

fold back the bench.

Hooks

Lock

lever

Caps

Lock lever