User Manual

Keyboard Percussion
ELC-02/ELCU-M02 Owner’s Manual
66
Mode 2:
Produces harmonies of up to three notes in a range
close to the melody played.
Mode 3:
Produces harmonies of up to four notes in a range
relatively distant from the melody played.
2 F.PEDAL
On/off switch for Foot Pedal control over Melody On
Chord operation. To use the Melody On Chord function
with Foot Pedal control, first switch the Foot Pedal
setting to ON, then select one of the three modes
(described above). When the control is on, pressing the
Foot Pedal activates the Melody On Chord function.
Reference page
• Controlling Melody On Chord (with Foot Pedal); (page 177)
Melody On Chord can be heard only when the Upper
Keyboard Voice section’s volume is set to the appropriate
value. Melody On Chord does not apply to the Lead
Voic es .
Keyboard Percussion
The Keyboard Percussion function features many types of
drum and percussion sounds, playable from the
keyboards and Pedalboard.
Keyboard Percussion has two different modes, Preset and
User. Preset Keyboard Percussion lets you play the preset
drum kit sounds from the keyboards (assigned
beforehand to the keys), while the User Keyboard
Percussion lets you freely assign the drum sounds to any
key or pedal you wish.
1 Turn off the Upper, Lower and/or Pedal
Voices by setting each Voice’s volume
to MIN.
NOTE
In the Voice Display, each Voice section can be muted
(page 16).
2 Turn on the Keyboard Percussion
function by pressing the KEYBOARD
PERCUSSION [1] or [2] button.
The Keyboard Percussion (K.B.P.) display appears.
Pressing the KEYBOARD PERCUSSION [1] button
calls up the Preset 1 kit on the Upper/Lower
keyboards, and pressing the [2] button calls up the
Preset 2 kit on the Pedalboard.
NOTE
Two Keyboard Percussion sets, [1] and [2], can be played
at the same time by setting both buttons to on.
Using the Preset Keyboard
Percussion