User Manual

iPhone/iPad Connection Manual
4
Determining the Connection Type
Check the connection method of the Electone you are using with an iPhone/iPad by referring to the below
matrix chart.
NOTE Audio signals cannot be transferred between the Electone and the iPhone/iPad. This means that audio signals created via your
keyboard performance cannot be recorded to the connected iPhone/iPad.
 iPhone/iPad Connection Matrix Chart
When using wireless communications:
NOTE The ELB-01 does not support wireless communication.
When using a cable for communications:
NOTE Lightning to USB Camera Adapter, Apple iPad Camera Connection Kit (Camera Connector) and Lightning to 30-pin Adapter are the
only Apple products supported. When products of manufacturers other than Apple are used, the instrument may not operate properly.
iPhone/iPad/iPod touch
Electone USB TO DEVICE
USB wireless LAN
adaptor
A or B
About USB wireless LAN adaptor
The USB wireless LAN adaptor lets you connect the Electone to an iPhone/iPad. For details,
contact your nearest Yamaha representative or the distributor listed at the end (or beginning)
of your Owner’s Manual. Or you can access the following website and contact Yamaha support
at your location.
http://www.yamaha.com/contact/
iPhone/iPad/iPod touch
Lightning connector 30-pin connector
Electone
USB TO HOST C or E D or F
MIDI G H