User Manual

ManualsBrandsYamaha ManualsElectoneELS-01 typeU (ELS-01U)

ELS-01/ELS-01C/ELS-01X (type U) Version 1.85 and 1.90 New Functions

ELS-01/ELS-01C/ELS-01X (type U)

Version 1.85 and 1.90

New Functions

Since the Electone Internet Direct Connection service is no longer available, the corresponding “Internet

Direct Connection” function is no longer available. Also, the compatibility with smart devices, such as iPhone

and iPad, has been added. This has changed the setting method of the wireless LAN setting. For up-to-date

instructions about the setting method of the wireless LAN, refer to this manual. The LCD screenshots in this

manual are taken from the ELS-01C.

Deleted the Internet Direct Connection function

Since the Electone Internet Direct Connection service has been discontinued, the “Internet Direct

Connection” function is no longer available.

Added compatibility with smart devices, such as iPhone and iPad

You can now connect smart devices, such as iPhone and iPad, to this Electone. Electone-compatible apps provide many

more convenient, enjoyable ways to use this Electone.

The firmware updater has been divided and released in two version steps.

Version 1.85: not including Ad Hoc mode

Version 1.90: including Ad Hoc mode

The Ad Hoc mode can be used from a version 1.90.

For details on the Ad Hoc mode, please see pages 6 and 9.

Added and deleted functions

Summary of content (10 pages)

PAGE 1
ELS-01/ELS-01C/ELS-01X (type U) Version 1.85 and 1.90 New Functions The firmware updater has been divided and released in two version steps. Version 1.85: not including Ad Hoc mode Version 1.90: including Ad Hoc mode The Ad Hoc mode can be used from a version 1.90. For details on the Ad Hoc mode, please see pages 6 and 9. Since the Electone Internet Direct Connection service is no longer available, the corresponding “Internet Direct Connection” function is no longer available.
PAGE 2
Connections Connecting to an iPhone/ iPad You can connect a smart device such as an iPhone or iPad to the instrument. By using an application tool on your smart device, you can take advantage of convenient functions and get more enjoyment out of this instrument. For details on connections, refer to the “iPhone/iPad Connection Manual” on the website. http://download.yamaha.com/ For information about compatible smart devices and application tools, access the following page: http://www.yamaha.
PAGE 3
Connecting to an iPhone/iPad Automatic Setup by WPS If your access point supports WPS, you can easily connect the instrument to access point by WPS, without making settings, such as key input, etc. 5 The “Connected” indication appears when connection between the instrument and the access point is successful. NOTE Check whether your access point supports WPS by referring to the owner’s manual for the access point you are using.
PAGE 4
Connecting to an iPhone/iPad Displaying available networks in the wireless LAN and connecting to a network 5 Select the desired network by pressing the button shown the name of the network in the display. Select the desired Network for connection from the Network list in the display by following the steps below. For a network without a lock icon: 1 For a network with a lock icon: 2 Connecting starts. Connect the USB wireless LAN adaptor.
PAGE 5
Connecting to an iPhone/iPad Manual Setup SECURITY If you cannot find the desired network on the display, it may be a network that is closed or hidden. In this case, you will need to manually input SSID, Security and Password settings for connection. Press the [SECURITY] button in the display to call up the display for security select, then press either the [NONE], [WPA2-PSK (AES)] or [WEP] button.
PAGE 6
Connecting to an iPhone/iPad Connecting by the Ad Hoc Mode Wireless LAN Mode 1 1 Set the Wireless LAN mode to “Ad Hoc Mode.” Refer to “Wireless LAN Mode.” 2 2 The settings for the instrument are complete if you do not need to change the SSID and so on. Connect the iPhone/iPad to the instrument by referring to the “iPhone/iPad Connection Manual.” Connect the USB wireless LAN adaptor. Press the [UTILITY] button, then press the [WIRELESS LAN] button on the display to call up the WIRELESS LAN Page.
PAGE 7
Connecting to an iPhone/iPad Wireless LAN Detailed Settings You can set the detailed settings for each mode: INFRASTRUCTURE and AD HOC. There is no need to change or make any settings if you’ve enabled connection between the iPhone/iPad and instrument. Reference Page • Wireless LAN Mode (page 6) 1 Set the Wireless LAN mode, then call up the display for detailed settings by pressing the [DETAIL] button in the WIRELESS LAN display.
PAGE 8
Connecting to an iPhone/iPad 2 As necessary, set the detailed settings. Wireless LAN mode INFRASTRUCTURE mode AD HOC mode Display DETAIL (IP ADDRESS) display DETAIL (WIRELESS) display DETAIL (IP ADDRESS) display Item DHCP DETAIL (OTHER) display 0.0.0.0 SUBNET MASK 0.0.0.0 GATEWAY 0.0.0.0 DNS SERVER 1 0.0.0.0 DNS SERVER 2 0.0.0.0 SSID ap-(model name, such as “ELS-01C”)(last 6 characters of MAC address in lowercase); or simply “ap-(model name),” if MAC address cannot be used.
PAGE 9
Connecting to an iPhone/iPad Initialize the wireless LAN settings “Factory Set (Initializing the Electone)” in the Owner’s Manual does not affect the wireless LAN settings, which can be initialized by the following procedure. Be careful when executing initialize, since it erases all the wireless LAN settings and replaces them with the factory defaults. 1 2 Press the [UTILITY] button, then press the [WIRELESS LAN] button on the display to call up the WIRELESS LAN Page.