User Manual

Deleting the version update data

Please turn off the power of the STAGEA if it is on.

1 Connect the USB flash memory containing

the version update data.

2 Simultaneously hold down the [START]

button in the Rhythm section on the panel

and turn on the power switch.

Keep holding down the [START] button until the display

below appears.

3 Press the [BREAK] button in the Rhythm

section on the panel.

4 The Delete operation starts when you press

the [START] button in the Rhythm section.

NOTICE

Make sure that you do not disconnect the USB flash

memory, or turn off the power during the Delete

operation. Doing so may result in damage to the USB

flash memory.

5 The Delete operation is complete when the

message below appears in the display.

Turn off the STAGEA and disconnect the USB flash memory

device.

Supplemental instructions

START

SYNCHRO

START

BREAK

START

SYNCHRO

START

SYNCHRO

START