Owner's Manual

Copying Registrations
ELS-02/ELS-02C Owner’s Manual
105
6
Registration Memory
5 In the same way, select the COPY TO
Registration number and Regist
Section.
The COPY TO Regist Section depends on the Regist
Section selected for COPY FROM.
NOTE
If you change the source Regist Section after changing the
destination Regist Section the destination may
automatically change to the section selected as the source
Regist Section.
6 Press the [EXECUTE] button in the
SECTION COPY area in the display.
The following display appears, prompting
confirmation of the operation.
7 Press the [COPY] button in the display
to copy the Registration and a message
momentarily appears in the display
indicating that the Registration has
been copied.
Select [CANCEL] to abort the operation.
To copy a Bank:
You can also copy Registration data by Bank. To do this,
select the source Bank in the COPY FROM area, select
the destination Bank in the COPY TO area, then press
the [EXECUTE] button at the right bottom in the display.
To delete the current Bank:
Press the [DELETE] button in the display.
NOTE
Data of Banks that follow the deleted Bank will be moved up to
the previous Bank respectively. For example, deleting the Bank
A will move the data of Bank B to Bank A, Bank C to Bank B,
Bank D to Bank C, and Bank E to Bank D.