Owner's Manual

Recalling Recorded Registrations
ELS-02/ELS-02C Owner’s Manual
120
Recalling Recorded
Registrations
Registrations (and bulk data) recorded to Song numbers
can be easily loaded back to the Electone by the following
procedure. The MDR independently recalls the following
five types of data:
•REGIST
•USER VOICE
•K.B.P.
• USER RHYTHM
•SEQUENCE
You can select and recall the desired data independently.
1 Insert the USB flash drive and select the
Song you want to load back to the
Electone.
For details on selecting a Song, see page 112.
2 Press [UNIT EDIT] button in the display
to call up the Unit Edit display.
3 Select the Unit you want to load to the
Electone.
4 Using the five “DATA TO BE LOADED”
buttons, select the desired data you
want to load.
NOTE
When you load the Registration data by using the Next
Unit function, all data will be loaded no matter which
buttons you select here.
5 Press the [LOAD] button.
A message appears, prompting confirmation of the
operation. Press the [LOAD] button to load the
Registration data.
Press [CANCEL] to cancel the operation.
NOTE
If you load a Registration while a rhythm is playing,
sequence data and User rhythms in the Registration data
cannot be loaded.
6 Exit from the Unit Edit display by
pressing the [CLOSE] button at the top
right of the display.
When you select the Protected Song, the buttons
(DATA TO BE LOADED) may be unavailable
(grayed out). For example, combining a part of one
Protected Song with another Protected Song is not
allowed.