Owner's Manual

Other Functions (Tools)
ELS-02/ELS-02C Owner’s Manual
128
Instructions when only one [USB TO
DEVICE] terminal is available:
It is recommended that you use connect both USB flash
drives (source and destination) to the [USB TO DEVICE]
terminals. However, if there are not enough terminals
available, you can copy a Song by following the procedure
below.
Folder copy cannot be executed with this procedure.
1 Follow steps 1 – 3 on page 127.
2 Press the (UP) button several
times until the Media List is displayed.
3 Select “MEMORY” as the destination.
4 Press the [EXECUTE] button to execute
the Song Copy.
The Song to be copied is copied to the internal
memory of the Electone. The message “Eject the
source media” will appear on the display.
NOTE
If you want to abort the operation, press the [CANCEL]
button.
NOTICE
Never attempt to turn the power off during copying of a
Protected Song. Data may be lost.
5 Eject the source USB flash drive.
After ejecting the source USB flash drive, the
message “Insert the destination media” will appear
on the display.
6 Insert the destination USB flash drive to
which you want to copy.
7 Select the destination.
For details on specifying the destination, see
page 112.
8 Press the [EXECUTE] button to execute
Song Copy. Select [CLOSE] or
[CANCEL] to abort the operation.
The Song is copied with the same name as the
source Song. If you copy a Song to a folder that
contains a Song whose name is the same as the
source Song, the copied Song name will be “source
Song name_XXX” (XXX indicates Song number).
If you copy an XG-compatible Song to another
folder or USB flash drive that contains a Song with
the same name as the source Song, a message
appears prompting confirmation of overwriting the
Song. Selecting [OVERWRITE] overwrites the XG-
compatible Song in the destination.
If you want to change the Song name, see page 116.
NOTE
By pressing the [CANCEL] button, you can cancel the
operation which is being executed, then return the
Protected Song to the original USB flash drive. For details,
follow the on-screen instructions.
You can delete the data of one Song. You can specify for
deletion only Registration data, only the performance
data, or both (entire Song). Also, only the Songs created
on the ELS-02/ELS-02C and XG-compatible Songs can be
deleted. Songs created on the EL series instruments such
as the EL-900 cannot be deleted.
1 Select the Song to be deleted.
For details on selecting a Song, see page 112.
2 Press the [TOOLS] button at the top
right of the display to call up the TOOLS
Page.
When moving a data-heavy Protected
Song:
When the Song being moved contains a large amount
of data, the move operation cannot be completed in a
single pass. In such a case, repeat steps 6 to 8 by
following the on-screen instructions.
Song delete