Owner's Manual

Playing Back Audio Files
ELS-02/ELS-02C Owner’s Manual
136
You can change the volume, tempo and pitch of the audio
file as the file is playing.
1 Connect the compatible USB flash drive
to the [USB TO DEVICE] terminal.
Reference Page
• Compatible USB flash drives (page 132)
2 Press the [AUDIO] button.
3 Select the desired audio file for
playback.
Since the operation for selecting audio files is the
same as that for Songs, refer to instruction steps 2
and 3 in “Selecting a Song” on page 112.
4 Press the (SETTING) button to
call up the Setting display.
To adjust the Volume:
Touch the VOLUME slider in the display or use the
Data Control dial.
Range: 0 – 127
To change the Temp o:
Use the TEMPO buttons in the display or
the Data Control dial to change the tempo. The
value can be adjusted from 75% to 125% and the
default value is 100%. Higher values result in a faster
tempo. If you press the TEMPO [RESET] button in
the display or select another audio file, this setting is
restored to the default value.
Range: 75% – 125%
To change the Pitch:
Use the PITCH buttons in the display or
the Data Control dial to change the tempo. This lets
you shift the pitch of an audio file in semitone steps
(from -12 to 12). If you press the PITCH [RESET]
button in the display or select another audio file, this
setting is restored to the default value (0).
Range: -12 – +12
NOTE
• Changing the playback tempo or pitch of an audio file
may change its tonal characteristics.
• Volume, tempo and pitch changes are temporary; these
values revert to their defaults when the power is turned
off and then back on again.
5 Play back the audio file to hear and
check the changes you’ve made in the
Setting display.
1 Press the REPEAT button as often as
necessary to select the desired repeat
mode.
Each press of the button switches among the modes.
(SINGLE)
Repeats the currently selected Song indefinitely.
(ALL)
Repeats all Songs in the currently selected folder in
order.
(RANDOM)
Repeats all Songs in the currently selected folder
randomly.
(OFF)
Cancels repeat playback.
2 Exit from the Setting display by
pressing the (FINISH) button at
the top right of the display.
3 Press the [R] (Play) button in the AUDIO
Page to begin repeat playback.
Changing the Volume, Tempo
and Pitch
Repeat playback