Owner's Manual

Saving the Edited Voice
ELS-02/ELS-02C Owner’s Manual
144
Saving the Edited Voice
Edited AWM Voices can be saved as User Voices (up to
80), and edited VA Voices can be saved as VA Custom
Voices (up to six).
1 Press the [SAVE] button at the top right
of the display to call up the SAVE Page.
2 Select the User Voice number or VA
Custom Voice number you wish to save
to.
The message appears to prompt confirmation of the
operation. (Saving a new Voice automatically erases
the Voice previously stored to the selected User
number.)
3 (If necessary) Press the [RENAME]
button to give a name to your original
Voice.
The method for editing the name is the same as the
one for the Song name in the MDR section. (See
page 116 for more information.) Up to sixteen
characters can be entered.
4 Press the [SAVE] button to save the
Voice, or press [CANCEL] to abort the
operation.
After saving the Voice, be sure to quit the Voice Edit
function (page 145) before turning the power off.
Turning off the Electone without quitting Voice Edit
erases the User Voice you have edited.
When saving User Voices (AWM)
When saving VA Custom Voices (VA)
NOTICE
This operation automatically erases any Voice that had
been previously saved to the selected User Voice
number or VA Custom Voice number. Be careful not to
erase any important data. Always save your important
data in advance to a USB flash drive using the MDR
function.