Owner's Manual

Rhythm Pattern Program
ELS-02/ELS-02C Owner’s Manual
149
10
Rhythm Program
Selecting [CLEAR] deletes all data in the rhythm
and changes the time signature.
Select [CANCEL] to abort the operation.
3 Select a section to which you want to
enter or edit the rhythm pattern.
Pressing the SECTION button on the display calls
up the Section Select pop-up menu. After selecting
the desired section, the pop-up menu automatically
closes.
You can play the selected section by pressing the
Rhythm [START] button on the panel. You can also
change the section while the rhythm is playing. For
details on muting the accompaniment part, refer to
page 158.
4 Sets the measure length of the rhythm
pattern.
Pressing the MEASURE button on the display calls
up the Measure Select popup menu. Select the
desired number of measures in the pop-up menu. If
you select Break or Fill In as the section, the
measure value cannot be changed.
5 (If necessary) Set the Metronome, Part
Assemble, and Part Clear parameters.
1 METRONOME
Turns the metronome click on or off. When set to ON,
the metronome sounds on each beat of the measure (for
example, three times per measure in 3/4 time) to serve as
a rhythmic guide when programming patterns. Set to On
here with Real Time Write.
Reference pages
• Step Write and Real Time Write (page 150)
• Entering percussion sounds to a rhythm pattern — Real Time
Write (page 151)
NOTE
Pressing the VOLUME buttons for Rhythm also changes the
volume of the metronome.
2 ASSEMBLE
Copies parts from another rhythm to the currently
selected rhythm. You can assemble various sections from
multiple rhythms to create your original rhythm.
Pressing the [ASSEMBLE] button calls up the following
display.
Select the copy source: Rhythm, Section and Part. Then
select the destination. You can copy only one selected
part, or all parts of a rhythm.
After setting the source and destination, press
[EXECUTE]. Copy is executed and returning to the
previous display.
1
2
3
Select copy source (Rhythm, Section, and Part)
Select the part for the
copy destination
Press here to execute
the copy