Owner's Manual

Rhythm Pattern Program
ELS-02/ELS-02C Owner’s Manual
153
10
Rhythm Program
2 NOTE [L] [R] controls
Selects the previous/next position’s note of the currently
selected instrument. In the notes below for example, you
can select notes 1, 3 and 4 one by one. Rests (2 and
5) are ignored.
3 QUANTIZE [L] [R] controls
Advances or reverses the rhythm clock by one step. The
size of a single step is determined by the Quantize value.
2 Change the accent level by using the
ACCENT buttons or Accent field.
The Accent field allows for finer changes.
1 Accent field
Touch on the box to enable the Accent field.
Turning the Data Control dial changes the accent level
over a range of 0 – 127.
The minimum setting results in no sound.
2 ACCENT buttons
Determines the coarse accent level. Eight accent levels
(from “ ” to “ ”) are available.
Press the desired Accent button to change the currently
selected note to the selected level.
To move an entered note:
1 Select the note you want to move (as in
step 1 on page 152).
2 Press the Rhythm Clock box to enable
the box.
3 Turn the Data Control dial to change the
position by one clock.
To change the length of an entered note:
The length of sustaining sounds such as Snare Roll and
Whistle can be changed by adjusting the Gate Time. See
page 158 for more information.
To erase an entered note:
1 Select the note you want to erase (as in
step 1 on page 152).
2 Press the [REST] button in the ACCENT
section of the display.
The selected note is deleted and replaced with a rest.
123 4 5
1
2