Owner's Manual

ELS-02/ELS-02C Owner’s Manual
184
12
Transpose and Pitch Controls
There are two pitch-related controls on the Electone: Transpose and Pitch. Transpose allows you to change the
key of the instrument and Pitch lets you finely adjust the tuning.
Transpose and Pitch can be adjusted in the Utility display. (The settings here cannot be recorded to the Music
Data Recorder.)
1 Press the [UTILITY] button.
The Utility display appears.
2 Press the [PITCH] button at the top right
of the display to call up the PITCH Page.
In this display, you can change the Transpose and
Pitch settings by using the buttons on the
display or the Data Control dial.
1 TRANSPOSE
Determines the coarse pitch setting of all the Voices, and
is adjustable in half-steps (semitones).
Range: -6 – +6
2 PITCH
Determines the fine pitch setting of all the Voices. Each
step changes the pitch by 0.2 Hz. The default Pitch is
440.0 Hz (corresponding to key A3).
Range: 427.2 Hz – 452.6 Hz
You can also change the Transpose and Pitch for each
Voice section, in the Voice Condition display. For more
information, see page 46.
NOTE
The Transpose/Pitch setting here is not applied to an XG Song.
DISPLAY SELECT
VOICE
DISPLAY
FOOT
SWITCH
RHYTHM
PROGRAM
UTILITY AUDIO
A.B.C.
M.O.C.
MDR
VOICE EDIT PATTERN SEQUENCE
U.ORGAN
FLUTES
L.ORGAN
FLUTES
ROTARY SP
SPEED
21