Owner's Manual

ELS-02/ELS-02C Owner’s Manual
185
13
13
Connections
Connections
On the underside of the Electone keyboard is a separate panel equipped with various input/output terminals
and miscellaneous controls.
Accessory Jacks and
Controls
This section provides brief explanations for each jack/
control on the Electone. For details on connecting to
external devices, see page 187.
1 INPUT VOLUME knob
For adjusting the level of input signal from the MIC./
LINE IN jack.
2 MIC./LINE IN jack
For connecting a mono input, such as microphone or
guitar. The Electone outputs the microphone or guitar
sounds, with reverb processing, through the built-in
speaker system.
Reference page
• Connecting a microphone or guitar (page 189)
3 MIC./LINE switch
When connecting a microphone or other electric/
electronic instrument to the MIC./LINE IN jack, make
sure to set this level gain switch appropriately, depending
on the device you use.
4 PHONES jacks
For connection of a stereo headphone set. When
headphones are connected to this jack, sound to the
Electone’s built-in speaker system is automatically cut off,
allowing you to play without disturbing others.
Reference page
• Using headphones (page 187)
MIN
MAX
INPUT
VOLUME
MIC. /
LINE IN
MIC. LINE PHONES
123
4