Owner's Manual

MIDI Control
ELS-02/ELS-02C Owner’s Manual
192
MIDI Control
When you connect your Electone with a second MIDI
device (such as a synthesizer or computer), you can
determine how the Electone controls that MIDI device,
or how the Electone is controlled.
1 Press the [UTILITY] button in the panel
to call up the Utility display.
2 Press the [MIDI] button at the top right
of the display to call up the MIDI Page.
1 OUTPUT
For setting the channels over which MIDI information
will be transmitted. Any channel from 1 through 16 can
be assigned to each keyboard (the Upper keyboard, the
Lower keyboard and the Pedalboard) as well as the
Expression pedal and 2nd Expression pedal. The MIDI
messages for each keyboard and Expression pedal will be
sent on the channels set here. You must set the transmit
channel here to match the receive channel of the
connected device. (The ELS-02 does not show the 2nd
Expression pedal.)
Pressing each OUTPUT button calls up the channel
selection pop-up menu. After you select the desired
channel, the pop-up menu automatically closes.
The Expression pedal and 2nd Expression pedal can be
set to “OFF” (MIDI information will not be transmitted).
On the 2nd Expression pedal, CC#4 by which MIDI
information is output as Second Expression can be also
set.
2 MIDI OUT FILTER
Deletes unnecessary MIDI data and keeps it from being
transmitted from the Electone. After Touch and Rhythm
start/stop are automatically filtered on the ELS-02.
In addition, Horizontal Touch and Second Expression are
automatically filtered on the ELS-02C. Set the parameter
for which you wish to disable transmission to ON.
NOTE
If you set Second Expression to on in the MIDI OUT FILTER
parameters, the setting in the OUTPUT (1) parameters will be
disabled.
3 INTERNAL/EXTERNAL
Switches control over the displayed items between the
Electone (INTERNAL) or the connected device
(EXTERNAL).
3 -1 LEAD 1
Determines Internal or External control of the Lead
Voic es.
INT. (Internal): Lead Voice 1 is played from the
Upper keyboard of the Electone. (If the To Lower
function is on, it is played from the Lower
keyboard.)
EXT. (External): Lead Voice 1 is played from the
connected instrument via MIDI channel 4.
3 -2 SYNC.
To synchronize playback with an external MIDI
device, you can use either the instrument's internal
clock (INT.) or MIDI clock signals from the external
device (EXT.).
INT. (Internal): The instrument uses its own
internal clock.
EXT. (External): The instrument uses MIDI clock
signals from the external device (MIDI).
3 -3 EXPRESSION
Determines the control of the expression pedal
functions. Ordinarily, this control is set to AUTO.
AUTO: Internal and External is automatically
switched.
INT. (Internal): You can manually control the
expression pedal even during MDR playback.
EXT. (External): While playing the MDR or
receiving MIDI messages, the expression pedal is
invalid. (The volume is controlled by the recorded
data in a USB flash drive or received MIDI data.)
1
23
3-1 3-2 3-3