Owner's Manual

Connecting to an iPhone/iPad
ELS-02/ELS-02C Owner’s Manual
199
13
Connections
2 As necessary, set the detailed settings.
3 Save the settings.
Set the detailed settings, then press the [SAVE] button on the display. When the saving operation is completed, the
detailed settings display returns to the previous display.
Wireless LAN mode Display Item Default setting Setting/Input
INFRASTRUCTURE
mode
DETAIL
(IP ADDRESS)
display
DHCP ON Determines whether or not DHCP is
used. If your router is compatible with
DHCP, select [ON] (set DNS
automatically) here.
Select on or off by pressing [ON] or
[OFF] button on the display.
IP ADDRESS 0.0.0.0 Set the wireless LAN detailed settings.
IP Address, Subnet Mask, Gateway,
DNS Server1, DNS Server2 can be set
when DHCP is set to Off but cannot be
set when DHCP set to On. For details on
confirmation and changes in the setting
of the access point on the router side,
refer to the owner’s manual for the
product you are using.
For details on how to enter characters,
refer to the instructions “Changing the
Song Name” on page 116. The setting
range is 0.0.0.0 – 255.255.255.255.
SUBNET MASK 0.0.0.0
GATEWAY 0.0.0.0
DNS SERVER 1 0.0.0.0
DNS SERVER 2 0.0.0.0
AD HOC mode DETAIL
(WIRELESS)
display
SSID ap-(model name,
such as “ELS-02C”)-
(last 6 characters of
MAC address in
lowercase); or simply
“ap-(model name),” if
MAC address cannot
be used.
To find the specific MAC address, see
“MAC address” below.
• SSID, Security and Password can be set
in the same way as those described in
the section “Manual Setup” on
page 196. The last 6 characters of the
MAC address must be entered in
lowercase.
• Press the number button which appears
by pressing the [CHANNEL] button on
the display then, select the channel.
• DHCP and IP Address can be set in the
same way as those of
INFRASTRUCTURE mode in this table.
• The Subnet Mask value can be input in
the numerical input display, which is
called up by pressing the [SUBNET
MASK] button in the display.
CHANNEL 11
SECURITY –
PASSWORD –
DETAIL
(IP ADDRESS)
display
DHCP ON
IP ADDRESS 192.168.0.1
SUBNET MASK 255.255.255.0
INFRASTRUCTURE
mode / AD HOC mode
DETAIL (OTHER)
display
HOST NAME (Model name, such
as “ELS-02C”)-(last 6
characters of MAC
address in
lowercase); or simply
“(model name),” if
MAC address cannot
be used.
Set the Host name. Up to 57 characters
(half size) including alphanumeric
characters, the “_” (underscore) and “-”
(hyphen) character. For details on how
to enter characters, refer to the
instructions “Changing the Song Name”
on page 116. After entering the
characters, press the [OK] button on the
display to finalize the setting.
The last 6 characters of the MAC
address must be entered in lowercase.
MAC ADDRESS – Shows the MAC address of the USB
wireless LAN adaptor. You cannot
change the MAC address here.
LAN DRIVER
VERSION
– This only displays the version of the LAN
driver; the setting cannot be made.
STATUS 00000000 Shows the error code of network
function. “00000000” means no error.