User Manual

Selecting a Song
ELS-02/ELS-02C Owner’s Manual
113
7
Music Data Recorder (MDR)
3 Press the [SEARCH] button in the
display.
NOTE
Previous searched data can be shown on the display.
However, the data does not appear if you’ve turned off the
power, removed the USB flash drive or saved the Song
after performing the search operation.
4 Press the [KEYWORD] button.
5 Enter the folder/Song name for
searching.
If necessary, press the [DELETE] button so that the
previous key word can be deleted, then enter the
new key word. (See page 116 for instructions on
changing the Song name.)
NOTE
• This function does not distinguish between capital and
lowercase letters.
• When searching for XG Songs, entering the extension
“.mid” is unnecessary.
6 Press the [OK] button.
The search will begin, and the detected folder/Song
name will be shown on the display.
To cancel the Search operation, press the
[INTERRUPT] button.
7 Confirm the detected folder/Song name.
8 Press the desired folder/Song.
The display will automatically exit from the
SEARCH display and the selected folder/Song
appears.
If nothing is detected, try the search again by using
another name (see step 4 above).
Previous key word
Detected folder/
Song list
Displayed data number
Detected number