User Manual

Recording
ELS-02/ELS-02C Owner’s Manual
114
Recording
Set the desired Registrations on the Electone. Make all
the Electone settings necessary for the Song you will
record. This means entering the all Registrations you will
need for the entire performance in the Registration
Memory. Make sure also to select the Registration that
you will use at the beginning of the Song.
NOTICE
Never attempt to remove the USB flash drive or turn the
power off during recording, reading or playback.
1 Insert a USB flash drive to the [USB TO
DEVICE] terminal.
2 Select a blank Song for recording your
performance.
For details on selecting a Song, see page 112.
If you want to overwrite an existing Song already
containing performance data, you will need to delete
it beforehand.
3 Press the [SONG] button at the top right
of the display to call up the SONG Page,
then select the [I] (Record) button.
The following display appears, indicating that you
can record your performance.
NOTE
If a message appears indicating there is not enough free
space in USB flash drive, press the [CANCEL] button, then
delete any unnecessary Songs if possible or insert new
USB flash drive. To continue recording your performance
on USB flash drive that does not have enough space,
press the [CONTINUE] button.
4 Press the [R] (Play) button.
An hourglass icon appears at the bottom left of the
display, indicating that Registration data is currently
being read.
NOTE
Regardless of the currently selected Unit number, the
recording operation will save data other than your
performance to the first Unit of the Song. This is why
pressing the [
I] (Record) button will call up the dialog to
confirm whether OK or not to save data to the first Unit
when the Registration Unit other than the first Unit is
loaded. In this situation, pressing [OK] will go to the
Recording Standby mode while pressing [CANCEL] will
exit from the Recording mode.
5 After the hourglass disappears, begin
playing.
6 When you finish playing, press the
[J] (Stop) button in the display.
The recording is finished and the LCD returns to the
MDR display. The Song to which your performance
is recorded is automatically named “SONG_XXX”
(XXX indicates Song number). You can change the
Song name as desired. (For details, see page 116.)
NOTICE
Do not remove the USB flash drive from the Electone
while data is being recorded (while the hourglass icon
or other message is shown).
If you make a mistake during recording, you can re-
record the Song from the beginning.
1 Press the [I] (Record) button while the
Song is still running.
This automatically stops recording and returns you
to the starting point of the Song.
Recording your performance
Re-recording (Retry)