User Manual

Playing Back a Song
ELS-02/ELS-02C Owner’s Manual
122
You can also play back selected parts of your recorded
performance, while other parts are temporarily turned
off. This function is especially useful for playing a single
part, such as the melody, over previously recorded
accompaniment parts.
To play back the selected part(s):
During playback or in the Settings display, press each part
button to turn the part you want to playback to “PLAY”
and the part you want to mute to “OFF.” Each pressing of
a part button switches the status between PLAY and OFF.
Pressing the [PART SAVE] button saves each part’s
playback status.
Reference page
• About the [SETTINGS] button (page 112)
To play back the selected part(s) of XG-
compatible Song data:
Press the Part [XG] button while XG-compatible Song
data is being played back.
The following XG PART SETUP display appears.
Reference page
• Converting to XG (page 129)
Press the appropriate channel buttons (e.g., the [CH1]
button) to set each channel to playback or mute. Each
pressing of a button switches the status: PLAY and OFF.
Set a part to [PLAY] if you want it to play back and [OFF]
if you do not.
The [ALL] button enables you to switch all channels to
PLAY/OFF at once.
To set each channel’s volume use the sliders. Each
channel’s volume can be adjusted between 0 and 100.
The [ALL] slider adjusts the overall volume.
Fast forward and Rewind:
During playback, press the [RR] (Fast forward) button
or [LL] (Rewind) button and hold it down until the
time reaches the desired position.
Even when the button is released, playback is paused. To
resume playback from the point you’ve advanced or
reversed to, press the [R] (Play) button or [CUSTOM
PLAY] button.
Pause:
If you want to temporarily stop playback of the Song or
Songs, press the [K](Pause) button.
To resume playback from the point at which the Song was
paused, press the [R](Play) button or [CUSTOM PLAY]
button.
Custom Play
If you want to play back a Song without resetting the
Registrations, press the [CUSTOM PLAY] button
instead of the [R] (Play) button. This displays the
Song time and starts playback immediately.
When you play a Song using the Next Unit function,
always press the [R] (Play) button to start the Song,
not the [CUSTOM PLAY] button.
Playing back the selected part(s)
Fast forward, Rewind and Pause