User Manual

Editing a Voice
ELS-02/ELS-02C Owner’s Manual
142
LAYER Page 3
1 LFO WAVE
Determines the LFO waveform used to vary the sound.
For details, see right column.
2 LFO SPEED
Determines the speed of the LFO waveform. Higher
values make the speed faster.
Range: 2 – 93
3 LFO PMD (Pitch Modulation Depth)
Determines the amount by which the LFO waveform
varies the pitch of the sound.
Higher values result in a greater amount of pitch change.
For the minimum setting, the pitch does not change.
Range: 0 – 400
4 LFO FMD (Frequency Modulation Depth)
Determines the amount by which the LFO waveform
varies the filter cutoff frequency.
Higher values result in a greater amount of frequency
change. For the minimum setting, the frequency does not
change.
Range: 0 – 4800 cent
5 LFO AMD (Amplitude Modulation Depth)
Determines the amount by which the LFO waveform
varies the amplitude of the sound. Higher values result in
a greater amount of amplitude change. For the minimum
setting, the amplitude does not change.
Range: 0 – 128
When playing a User Voice you have created using the
LFO parameters (above), set the Vibrato setting in the
Voice Condition display to “Preset,” not “User.” If Vibrato
is set to “User” and the Vibrato parameters (depth and/or
speed) are set fairly high, you may not be able to hear the
effect of the LFO.
Reference page
• Vibrato (page 44)
34 512
LFO (Low Frequency Oscillator)
As its name suggests, the LFO creates waveforms of a
low frequency.
These waveforms can be used to vary the pitch, filter
or amplitude to create effects such as vibrato, wah
and tremolo.
The following five waveforms are available.
saw (sawtooth) tri (triangle)
squ (square) rnd (random)
sine