User Manual

Connecting to an iPhone/iPad
ELS-02/ELS-02C Owner’s Manual
193
13
Connections
Connecting to an iPhone/
iPad
You can connect a smart device such as an iPhone or iPad
to the instrument. By using an application tool on your
smart device, you can take advantage of convenient
functions and get more enjoyment out of this instrument.
For details on connections, refer to the “iPhone/iPad
Connection Manual” on the website.
http://download.yamaha.com/
For information about compatible smart devices and
application tools, access the following page:
http://www.yamaha.com/kbdapps/
Connection with a USB wireless LAN
adaptor (sold separately)
The USB wireless LAN adaptor lets you connect the
Electone to an iPhone/iPad wirelessly. For details about
the USB wireless LAN adaptor, contact your nearest
Yamaha representative or the distributor listed at the end
(or beginning) of this manual. Or you can access the
following website and contact Yamaha support at your
location.
http://www.yamaha.com/contact/
To enable a wireless connection between the Electone and
an iPhone/iPad, follow the instructions in the “iPhone/
iPad Connection Manual” on the website, and also refer
back to “Wireless LAN settings” in this manual for the
specific Wireless LAN settings you’ll need to make for
wireless connection.
NOTE
MIDI and [USB TO HOST] terminals are automatically disabled
when the USB wireless LAN adaptor is connected.
Start wireless connection according to the instructions in
the “iPhone/iPad Connection Manual” on the website,
then make sure to make appropriate setups from the
following instructions: “Automatic Setup by WPS,”
“Displaying available networks in the wireless LAN and
connecting to a network,” “Manual Setup” or
“Connecting by the Ad Hoc Mode.” Refer to pages 194 –
197 in this Manual, then set up as required.
If there is no access point, follow the instructions in
“Connecting by the Ad Hoc Mode” (page 197).
Reference Page
• Wireless LAN Detailed Settings (page 198)
• Initialize the wireless LAN settings (page 200)
NOTICE
• When you use the instrument along with an application on
your iPhone/iPad, we recommend that you first set
“Airplane Mode” to “ON” then set “Wi-Fi” to “ON” on your
iPhone/iPad in order to avoid noise caused by
communication.
• Do not place your iPhone/ iPad in an unstable position.
Doing so may cause the device to fall and result in
damage.
NOTE
Before using the [USB TO DEVICE] terminal, be sure to read
“Precautions when using the [USB TO DEVICE] terminal” on
page 110 in chapter 7.
Wireless LAN settings