User Manual

Selecting Rhythms with the Rhythm Buttons
ELS-02/ELS-02C Owner’s Manual
57
5
Rhythm/Keyboard Percussion
You can turn the rhythm on/off and switch the sections as
desired by pressing the buttons on the panel. Using the
Fill Ins and Break patterns let you add dynamic interest
and “spice” to your performance.
To start/stop the rhythm:
START
The rhythm begins as soon as the [START] button is
pressed.
To stop the rhythm, press the button again.
SYNCHRO START
The [SYNCHRO START] button puts the rhythm in
“standby.” The rhythm starts when you press a note on
the Lower keyboard or Pedalboard.
When the A.B.C. mode is set to OFF, pressing the
[SYNCHRO START] button again stops the rhythm.
When the A.B.C. mode is set to something other than
OFF, releasing the key from the Lower keyboard stops the
rhythm.
When the A.B.C. mode is set to Custom A.B.C., releasing
the keys both from the Lower Keyboard and the
Pedalboard stops the rhythm.
Reference page
• Automatic Accompaniment – Auto Bass Chord (A.B.C.)
(page 66)
Rhythm structure
Each rhythm is made up of “sections.” Since each
section is a rhythmic variation of the basic rhythm,
you can use them to add “spice” to your performance
and mix up the beats while you are playing. You can
freely change the section while the rhythm is played
back.
INTRO
This is used for the beginning of the Song. There are three
Intro sections that can be selected with the INTRO [1] – [3]
buttons. When the Intro finishes playing, the rhythm
automatically shifts to the Main section.
MAIN
This is used for playing the main part of the Song. There are
four Main sections that can be selected with the MAIN/FILL
IN [A] – [D] buttons. The rhythm pattern of several
measures repeats indefinitely.
FILL IN
This is designed for use as a temporary and regular
rhythmic pattern to spice up a repeating rhythm. There are
four Fill In sections that can be played by pressing the
selected (lit) MAIN/FILL IN [A] – [D] buttons as desired.
When one measure pattern of a Fill In finishes playing, the
rhythm automatically shifts to the Main section.
BREAK
This lets you add dynamic variations and breaks in the
rhythm pattern. The Break section is selected by pressing
the [BREAK] button. When the one-measure Break pattern
finishes playing, the rhythm automatically shifts to the Main
section.
123
INTRO
Selected Intro section’s lamp is lit
ABCD
MAIN / FILL IN
Selected Main section’s lamp is lit
ABCD
MAIN / FILL IN
Selected Fill In section’s lamp flashes
BREAK
START
SYNCHRO
START
The lamp is lit when the Break section is selected
ENDING
This is used for the ending of the Song. There are three
Ending sections that can be selected with the ENDING [1] –
[3] buttons. When the ending is finished, the rhythm
automatically stops.
Operating the rhythm from the
panel
123
ENDING
Selected Ending section’s lamp is lit
START
SYNCHRO
START
START
SYNCHRO
START