User Manual

Storing Registrations to Another Bank
ELS-02/ELS-02C Owner’s Manual
96
Storing Registrations to
Another Bank
With the default initial settings and Bank A selected, you
can store your original Registrations to Banks A and B.
Storing the Registrations to Bank B enables selection of
Bank C. Similarly, storing Registrations to Bank C enables
selection of Bank D, and so on, up to a maximum of Bank
E.
1 At the lower right section of the Voice
Display, select the Registration Bank.
You can select the Banks from A (at top) to an empty
Bank next to the last Bank containing data. When
Banks A and B contain Registration data, for
example, you can select Banks A, B, and C (which is
empty). The on/off indication of Bank (A – E) shows
whether the selected Bank contains data or not.
2 Create your original Registration, then
store it to any of the Number buttons 1 –
16. (This corresponds to steps 1 – 2 on
page 95.)
Here, the Registration will be stored to Number
button [1] of Bank B.
NOTE
When you try to store Registrations after changing the Bank, a
confirmation dialog appears. Confirm whether or not you want to
set the current Bank as the destination.
Selecting Registrations
Select a Bank, then press the numbered button that
corresponds to the Registration you wish to select.
• You can also recall Registrations by using the right
footswitch. This function is called “Registration Shift”
(page 99).
• You can also program the Registrations to change
automatically at specific points within the Rhythm
Sequence. This function is called “Registration
Sequence” (page 174).
Using the [D.] (Disable) button:
Rhythm and automatic accompaniment patterns also
change when you select different Registration
Memory buttons. Pressing the [D.] (Disable) button
allows you to keep the same rhythm, accompaniment
patterns, tempo, and so on throughout all your
Registration changes, or make your own rhythm
selections if you want to (while the [D.] button is lit).
The particular settings that do not change when the
[D.] (Disable) button is on depend on the Disable
mode setting. For details on the Disable mode, see
“Selecting Disable Mode” below.
NOTE
The Disable function is available even after changing the
Bank.
7 8 9 10 11 12 D.
Disable button