LR CD Changer Receiver Sintoamplificador con cambiador de discos compactos INPUT SELECTOR VOLUME VCR/LD-TV/CD/TUNER/TAPE•MD/AUX CD CHANGER RECEIVER EMX–100CD OPEN/ CLOSE DISC CHANGE INPUT SELECTOR VOLUME VCR/LD-TV/CD/TUNER/TAPE•MD/AUX CD CHANGER RECEIVER EMX–100CD DISC 2 1 3 RANDOM REPEAT TIME HOUR MIN MEMORY AUTO/MAN'L TIME ADJ TIMER PROGRAM OPEN/ CLOSE POWER PRESET/TUNING/BAND A/B/C/D/E DISC CHANGE MUSIC ECHO ECHO INPUT SELECTOR VOLUME VCR/LD-TV/CD/TUNER/TAPE•MD/AUX PHONES
SUPPLIED ACCESSORIES ACCESORIOS INCLUIDOS ● ● ● ● After unpacking, check that the following parts are contained. Desembalar el aparato y verificar que los siguientes accesorios están en la caja.
1 1 2 345 6 7 8 9 0 A STEREO TUNED MEMORY AUTO PROGRAM USER NOR TEST PRO LOGIC HALL ARENA 1 2 PHANTOM 3 STEREO KARAOKE L R 3 4 TIMER SLEEP MUSIC ROCK BLUES RAP JAZZ B PRESET 100 350 C VOLUME MHz 1K 3.
2 F MUSIC ROCK PROGRAM G H I RANDOM 1 2 3 4 5 6 USER ARENA 7 8 9 10 11 12 TOTAL REM 13 14 15 OVER 15 TRACK 100 350 PROG S F REP 1K 3.
3 1 1 2 CD 3 4 2 1 2 3 4 6 7 8 6 7 8 9 0 3 A B C D E TIME PROG MODE REPEAT 5 PRESET STOP ECHO TEST FLAT MUSIC LEVEL PROGRAM USER POWER SLEEP DISPLAY VOLUME F PLAY/PAUSE INPUT CENTER/REAR /DELAY G +I0 RANDOM OPEN/CLOSE TUNER DISC SKIP 4 5 6 7 5 E D C B A 0 H I J K 1 2 CD 3 4 1 2 3 4 6 7 8 5 5 PRESET 6 7 8 9 A B C D TIME PROG MODE REPEAT 0 E +I0 RANDOM OPEN/CLOSE TUNER STOP DISC SKIP PLAY/PAUSE INPUT 8 CENTER/REAR /DELAY 9 TEST
Center speaker Altavoz central Rear speakers Altavoces traseros R L SPEAKERS CENTER/REAR REAR R CENTER Front speakers L REAR Altavoces delanteros R L REAR SINGLE CENTER :8Ω MIN./SPEAKER REAR :4Ω MIN./SPEAKER REAR SINGLE :8Ω MIN./SPEAKER SEE OWNER'S MANUAL FOR CONNECTION. SPEAKERS FRONT R L 6Ω MIN./SPEAKER SEE OWNER'S MANUAL FOR CONNECTION. VOLTAGE SELECTOR SPEAKERS CENTER/REAR REAR R CENTER L REAR MAINS ANTENNA REAR SINGLE CENTER :8Ω MIN./SPEAKER REAR :4Ω MIN.
Monitor TV Tocadiscos de discos láser, etc. Monitor de TV VIDEO IN VIDEO OUT AUDIO OUT LD player, etc. VOLTAGE SELECTOR SPEAKERS CENTER/REAR REAR R CENTER L REAR MAINS ANTENNA REAR SINGLE CENTER :8Ω MIN./SPEAKER REAR :4Ω MIN./SPEAKER REAR SINGLE :8Ω MIN./SPEAKER AM SEE OWNER'S MANUAL FOR CONNECTION. AC OUTLET SPEAKERS FRONT R GND L AUDIO SIGNAL AUX TAPE•MD IN OUT LD•TV VCR IN SUBWOOFER OUT 75Ω FM UNBAL. VIDEO SIGNAL UNSWITCHED 100W MAX. 6Ω MIN.
A VOLTAGE SELECTOR SPEAKERS CENTER/REAR REAR R CENTER VOLUME L REAR MAINS ANTENNA REAR SINGLE CENTER :8Ω MIN./SPEAKER REAR :4Ω MIN./SPEAKER REAR SINGLE :8Ω MIN./SPEAKER AC OUTLET VOLUME AM SEE OWNER'S MANUAL FOR CONNECTION. SPEAKERS FRONT R GND L AUDIO SIGNAL AUX TAPE•MD IN OUT LD•TV VCR IN SUBWOOFER OUT 75Ω FM UNBAL. VIDEO SIGNAL UNSWITCHED 100W MAX. LD•TV L 6Ω MIN.
ENGLISH Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product. CONTENTS Page Page PRECAUTIONS ................................................2-3 SPEAKER BALANCE ADJUSTMENT .........11-12 FEATURES ..........................................................4 COMPACT DISC PLAYER OPERATION .....13-19 NAMES OF CONTROLS AND INDICATORS......
PRECAUTIONS: READ THIS BEFORE OPERATING YOUR UNIT ■ To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. ■ Do not attempt to clean the unit with chemical solvents; this might damage the finish. Use a clean, dry cloth. ■ Choose the installation location of this unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibration and excessive dust, heat, cold or moisture.
WARNING IMPORTANT Please record the serial number of this unit in the space below. To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. Serial No.: To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.
FEATURES Tuner The System ● 5 speaker Configuration Front L, R: ● 40 Station Random Access Preset Tuning ● 40 Station Automatic Preset Tuning 75W + 75W (6Ω) RMS Output Power, 10% THD, 1 kHz 65W + 65W (6Ω) RMS Output Power, 1% THD, 1 kHz Center: 20W (8Ω) RMS Output Power, 1% THD, 1 kHz Rear: 20W (8Ω) RMS Output Power, 1% THD, 1 kHz Sound Field Processor Including Dolby Pro Logic Surround Decoder ● 2 Programs for Dolby Surround Decoding (DOLBY PRO LOGIC and DOLBY 3 STEREO) 2 Programs for Sound Field P
For amplifier/tuner Display (See figure 1 on page 3 at the beginning part of this manual.
REMOTE CONTROL TRANSMITTER Names of control buttons (See figure 3 on page 5 at the beginning part of this manual.
This unit is designed to provide the best sound-field quality with a 5-speaker configuration: front speakers, rear speakers and a center speaker. You may omit the center speaker, if for some reason it is not practical to use a center speaker. (Refer to the “4Speaker Configuration” shown below.) The front speakers are used for the main source sound plus the effect sounds. The rear speakers are used for the effect and surround sounds, and the center speaker is for the center sounds (dialog etc.).
CONNECTIONS Antenna connection ANTENNA (1) (1) Supplied FM antenna AM Connect the FM antenna wire to the corresponding terminal and direct the FM antenna wire to the direction where the strongest signal can be received. GND 75Ω UNBAL. FM (2) Supplied AM loop antenna Connect the AM loop antenna wires to the corresponding terminals. Position the AM loop antenna for optimum reception. Place the AM loop antenna on a shelf etc., or install it on the rack or wall with screws (not supplied).
Never plug the AC supply lead of this system into the AC outlet until all connections are completed. How to Connect: Connecting speakers Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and – markings are observed. If these wires are reversed, the sound will be unnatural and lack bass.
SETTING THE CLOCK (See figure 0 on page 8.) 1 While the power is on, press the DISPLAY button to display the time. If the power is off, you can proceed to the next step. 2 While holding the TIME ADJ button pressed, press the HOUR button and set the hour. * Press the HOUR button once to advance the time by 1 hour. Press and hold to advance continuously. 3 Singapore model use a 24-hour display.
This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test tone generator. When this adjustment is performed, the sound output level heard at the listening position will be the same from each speaker. This is important for the best performance of the built-in Dolby Pro Logic surround decoder. The adjustment of each speaker output level should be done at your listening position with the remote control transmitter.
SPEAKER BALANCE ADJUSTMENT 6 Adjust the sound output levels of the center speaker and the rear speakers by using the LEVEL control buttons so that they become almost as same as that of the front speakers. ● When the test tone is output from the center speaker, pressing the LEVEL control buttons change the output level of the center speaker. MUSIC 1 2 CD 3 4 1 2 3 4 6 7 8 6 7 8 9 C D A B TIME PROG MODE REPEAT PROGRAM PRO LOGIC USER NOR TEST 5 5 PRESET 0 E 100 350 +I0 1K 3.
CD playback DISC selector buttons 3 1 Select the CD player by turning the INPUT SELECTOR until “CD” appears on the display. 2 3 Press the OPEN/CLOSE button to open the disc table. 4 Press the OPEN/CLOSE button to close the disc table. * The total number of tracks and the total playing time of the disc being selected will be displayed for several seconds. * The music calendar will be displayed only for the number of tracks on the disc being selected.
COMPACT DISC PLAYER OPERATION Direct operation To interrupt playback 1 Press the play/pause / button. * The “ ” indicator will flash. 2 Press the play/pause from the same point. / When the power is off (in the standby mode), pressing the DISC selector (1, 2 or 3) button will turn the power on and start CD playback automatically.
“Skip search” and “Manual search” are performed using the same buttons. To play a desired track on the disc (Skip search) 1 INPUT SELECTOR The beginning of any track can be found automatically.
COMPACT DISC PLAYER OPERATION Program play You can program up to 20 tracks in any desired order. 1 INPUT SELECTOR VOLUME VCR/LD-TV/CD/TUNER/TAPE•MD/AUX CD CHANGER RECEIVER EMX–100CD OPEN/ CLOSE 1 2 Load discs and close the disc table. 3 If necessary, select a desired disc by pressing the DISC SKIP button. * Just after you changes the disc, this unit reads the contents of the newly selected disc for a few seconds.
To stop program play • • Press the stop button. The first programmed track number will be displayed. To resume playback, press the play/pause / button. Playback will begin from the beginning of the program. To cancel a programmed sequence INPUT SELECTOR There are several methods as described below. • Press the stop button while the unit is stopped. • Open the disc table • Switch off the power.
COMPACT DISC PLAYER OPERATION Repeat play 1 All discs, an entire disc, a single track or a programmed sequence can be continuously repeated. INPUT SELECTOR VOLUME VCR/LD-TV/CD/TUNER/TAPE•MD/AUX CD CHANGER RECEIVER EMX–100CD 1 While watching the display, press the REPEAT button once or more to select a desired repeat play mode (S REP or F REP).
1 Random play 3 INPUT SELECTOR Tracks on a selected disc or all discs on the disc table can be played back in a random order. VOLUME VCR/LD-TV/CD/TUNER/TAPE•MD/AUX CD CHANGER RECEIVER EMX–100CD OPEN/ CLOSE DISC CHANGE DISC 2 1 3 RANDOM REPEAT TIME HOUR MIN MEMORY AUTO/MAN'L TIME ADJ TIMER PROGRAM PRESET/TUNING/BAND POWER A/B/C/D/E 1 2 Load discs and close the disc table. 3 Press the RANDOM button to begin random play. * The “RANDOM” indicator will light up.
TUNING OPERATION Normally, if station signals are strong and there is no interference, quick automatic-search tuning (Automatic tuning) is possible. However, if signals of the station you want to select are weak, you must tune to it manually (Manual tuning). 1 2 3, 2 INPUT SELECTOR Automatic tuning 1 Select the tuner by turning the INPUT SELECTOR until “TUNER” appears on the display. 2 Select the reception band (FM or AM ) by pressing the PRESET/TUNING/BAND button confirming it on the display.
English TUNING OPERATION Preset tuning This unit can store station frequencies selected by tuning operation. With this function, you can select any desired station by only calling the corresponding preset station number. Up to 40 stations (8 stations x 5 groups) can be stored. 3, 1 3, 5 To store stations (Example: To store a station to A1) INPUT SELECTOR VOLUME VCR/LD-TV/CD/TUNER/TAPE•MD/AUX CD CHANGER RECEIVER EMX–100CD OPEN/ CLOSE DISC CHANGE 1 DISC 2 1 Tune in to a desired station.
TUNING OPERATION Automatic preset tuning You can also make use of an automatic preset tuning function. By this function, this unit performs automatic tuning and stores stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the manual preset tuning method on the previous page.
1 To listen to or watch a source on an external unit connected with this system 1 Select the position of input source (TAPEzMD, AUX, VCR 3, 2 INPUT SELECTOR or LDzTV) you will play back by turning the INPUT SELECTOR until the corresponding name appears on the display. * The names of input source positions correspond with the names of terminals to connect with external units on the rear of this unit.
USING GRAPHIC EQUALIZER The built-in graphic equalizer presents you with the pleasure of listening to music with various sound effects. This unit provides 4 preset equalizer modes as listed right. You can enjoy listening to music with a desired sound effect by selecting one of these modes. In addition, the built-in 5 band graphic equalizer allows you to adjust the equalizer pattern to create an effect for your desired sound taste.
Adjusting the graphic equalizer for your desired sound taste The 5 band graphic equalizer allows you to adjust the level for each frequency band. * Make adjustment by monitoring the equalizer level indicators on the display. 3 INPUT SELECTOR 1 Play back a source. (For source playback, refer to the sections beginning on page 13.) 2 Press the equalizer control or button once or more to select the frequency band to which you will adjust the level. * The selected frequency band is shown on the display.
USING SOUND FIELD PROCESSOR The Sound Field Processor built into this unit presents you with the ambience of an actual concert hall etc. by adding effects as sonic reflections or reverberations that create the sound environment of a hall etc. This system provides preset sound field programs shown below. You can enjoy an excellent audio sound field by selecting one of them, and adding desired adjustments.
Listening to the music with a sound field effect 2 INPUT SELECTOR VOLUME VCR/LD-TV/CD/TUNER/TAPE•MD/AUX CD CHANGER RECEIVER EMX–100CD 1 Play back a source. (For source playback, refer to the sections beginning on page 13.) 2 Press the PROGRAM button once or more so that the name of a desired program appears on the sound field program indicator. * Whenever you press the PROGRAM button, the program changes and is displayed as follows.
USING SOUND FIELD PROCESSOR Adjusting CENTER LEVEL If desired, you can adjust the sound output level of the center speaker even if the output level is already set in “SPEAKER BALANCE ADJUSTMENT” on page 11–12. 1 2 CD 3 4 1 2 3 4 6 7 8 6 Control range : +10 to –21 5 5 PRESET 7 8 9 A B C D TIME PROG MODE REPEAT 0 E +I0 STOP DISC SKIP 1 ECHO LEVEL TEST Press the CENTER/REAR/DELAY selector button once or more so that “CENT” appears on the display.
Adjusting DELAY TIME 1 2 CD 3 4 1 2 3 4 6 7 8 6 7 8 9 C D A B TIME PROG MODE REPEAT You can adjust the time difference between the beginning of the sound from the main speakers and the beginning of the effect sound from the rear speakers. The larger the value, the later the effect sound is generated. This adjustment can be made to all programs (except DOLBY 3 STEREO) individually.
STORING YOUR OWN PROGRAMS Your favorite pair of any equalizer mode (or an equalizer pattern of your own adjusting) and any sound field program can be stored as a user program. Up to 4 pairs can be stored as desired. 1 2 1 To store INPUT SELECTOR 1 Select a desired equalizer mode by pressing the MUSIC button. * If desired, adjust the equalizer as you prefer by using the equalizer control buttons. 2 Select a desired sound field program by pressing the PROGRAM button.
Singing karaoke 1 MIC This system allows you to enjoy singing karaoke by using not only a source for karaoke use but also any normal audio source. MIC MIXING MIN MAX INPUT SELECTOR 1 Connect one or two microphones to the MIC jack(s) on the front panel. 2 Play back a source. (For source playback, refer to the sections beginning on page 13.
HOW TO USE THE BUILT-IN TIMER Timer play By using the built-in timer, you can set the time when the unit turns on and a source begins playing automatically, and the time when the unit turns off automatically. 2-➁ 2-➀ INPUT SELECTOR 1 Prepare the source to be played. For tuner: Tune in to the station you will listen to. VOLUME VCR/LD-TV/CD/TUNER/TAPE•MD/AUX CD CHANGER RECEIVER EMX–100CD OPEN/ CLOSE DISC CHANGE 1 DISC 2 For CD player: Load a disc on the disc table.
2-➂, ➃ 2-➂, ➃ 3 INPUT SELECTOR VOLUME VCR/LD-TV/CD/TUNER/TAPE•MD/AUX CD CHANGER RECEIVER EMX–100CD OPEN/ CLOSE DISC CHANGE 1 DISC 2 3 RANDOM REPEAT TIME HOUR MIN MEMORY AUTO/MAN'L TIME ADJ TIMER PROGRAM PRESET/TUNING/BAND POWER ➂ ON TIME/time setting mode [“ON TIME” appears on the display, and soon it is changed to a time setting mode.] Set to the time when you want to begin the timer play by using the HOUR button and the MIN button.
HOW TO USE THE BUILT-IN TIMER Sleep timer operation This unit can be turned off automatically. INPUT SELECTOR VOLUME 1 2 Play the desired sound source. 3 Press the SLEEP button repeatedly until the desired sleep time appears on the display. The display will change as described below. [Time is displayed by the hour (h) and the minute (m).
If your unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and contact your authorized YAMAHA dealer or service center for help. CAUSE The System SYMPTOM AC supply lead is not plugged in. Plug in the AC supply lead. No sound from one speaker Loose speaker connections. Connect properly. No sound from speakers.
SPECIFICATIONS As a part of policy of continuous improvement, YAMAHA reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. ■ Amplifier section ■ Tuner section Minimum RMS Output Power per Channel Front L, R 6 ohms, 1 kHz, 10% THD ................................ 75W+75W 6 ohms, 1 kHz, 1% THD .................................. 65W+65W Center 8 ohms, 1 kHz, 1% THD ....
ESPECIFICACIONES TECNICAS Como parte de la política de mejoras continuas, YAMAHA se reserva el derecho de realizar cambios en el diseño y especificaciones para la mejora del producto sin previo aviso. Las figuras indicadas que especifican el rendimiento son valores nominales de los aparatos de producción. ■Sección del Amplificador ■Sección del sintonizador Potencia de salida eficaz mínima por canal Delantero izquierdo, derecho 6 ohmios, 1 kHz, 10% de D.A.T. ...................