User Manual

4
EMX512SC/EMX312SC/EMX212S
Siempre apague el dispositivo cuando no lo use.
El rendimiento de los componentes con contactos móviles, como interruptores, controles de volumen y conectores, se reduce progresivamente. Consulte al personal cualifi-
cado de Yamaha sobre la sustitución de los componentes defectuosos.
Acerca de este manual
Este manual se divide en las dos secciones principales siguientes.
■ Elementos básicos de la mezcladora (comienza en la página 6)
Se presenta una explicación general de las mezcladoras y los conceptos de mezcla. Incluye una guía rápida que ayudará a los principian-
tes a ponerse a trabajar rápidamente.
■ Configuración y utilización de la EMX (comienza en la página 20)
Se aporta información detallada acerca de la EMX. Se presentan las funciones de la EMX, se identifican y explican los controles, indica-
dores y conectores y se explica cómo preparar el equipo.
*Este manual corresponde a los modelos EMX512SC, EMX312SC y EMX212SC. En este manual, el término "EMX" se utiliza para estos tres modelos.
* Las ilustraciones contenidas en este documento son únicamente orientativas y es posible que no se correspondan con el aspecto real durante el funcionamiento.
* Los nombres de empresas y de productos que se utilizan en este manual son marcas comerciales o marcas registradas de las respectivas compañías.
Los conectores de tipo XLR se conectan de la siguiente manera (norma IEC60268): patilla 1: conexión a tierra, patilla 2: positivo (+), y patilla 3: negativo (-).
Utilice sólo clavijas Neutrik (NL4) para conectar los conectores Speakon.
Yamaha no se responsabiliza por daños debidos a uso inapropiado o modificaciones hechas al dispositivo.
La copia de música disponible comercialmente u otros datos de audio a efectos que no sean el uso personal queda estrictamente prohibida por la legisla-
ción relativa a los derechos de autor. Respete todos los derechos de autor y consulte con un especialista en caso de duda acerca de la autorización de uso.
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
WARNING: THIS APPARATUS MUST BE EARTHED
IMPORTANT. The wires in this mains lead are coloured in accordance with the following code:
GREEN-AND-YELLOW : EARTH
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the termi-
nals in your plug proceed as follows:
The wire which is coloured GREEN-and-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by
the safety earth symbol or coloured GREEN or GREEN-and-YELLOW.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
• This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd. (3 wires)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contai-
ned in this manual, meets FCC requirements. Modifications not
expressly approved by Yamaha may void your authority, granted by
the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/
or another product use only high quality shielded cables. Cable/s
supplied with this product MUST be used. Follow all installation
instructions. Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with the
requirements listed in FCC Regulations, Part 15 for Class “B” digi-
tal devices. Compliance with these requirements provides a reaso-
nable level of assurance that your use of this product in a
residential environment will not result in harmful interference with
other electronic devices. This equipment generates/uses radio fre-
quencies and, if not installed and used according to the instruc-
tions found in the users manual, may cause interference harmful to
the operation of other electronic devices. Compliance with FCC
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
regulations does not guarantee that interference will not occur in
all installations. If this product is found to be the source of interfe-
rence, which can be determined by turning the unit “OFF” and
“ON”, please try to eliminate the problem by using one of the follo-
wing measures:
Relocate either this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circuit breaker or
fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type of
product. If you can not locate the appropriate retailer, please con-
tact Yamaha Corporation of America, Electronic Service Division,
6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed by
Ya maha Corporation of America or its subsidiaries.
FCC INFORMATION (U.S.A.)