User Guide

14 Example setups
EMX3000—Owner’s Manual
■ Sending an independent mix to
the monitor speakers
1 Set the MONI 1 fader to the “10” posi-
tion.
2 Raise the MONI 1 controls for the chan-
nels that you wish to hear from the moni-
tor speakers.
3 Use the MONI 1 fader of the master sec-
tion to adjust the overall volume.
■ Using an external effect proces-
sor
You may sometimes want to use an external effect
processor, such as an echo machine or a multi-
effect unit.
Follow the steps below.
1 Set the EFFECT fader of the master sec-
tion to the “10” position.
2 Raise the EFFECT controls for the channels
to which you want the external effect to
be applied.
3 Use the EFFECT fader in the master sec-
tion to adjust the level of the signal out-
put to the external effects processor so
that the sound will not be distorted at the
input of the external effects processor.
4 Use the control of the ST SUB channel to
which the processed signal is input from
the external effects processor to adjust
the level of the effect sound.
Note: The MONI controls are not affected by
the level settings of each channel. This allows
you to create a mix that is independent of the
main speakers.