User Manual

Controls and Functions
14
EMX7 Owner’s Manual
#5 [SPEAKERS A/B] jacks
Use commercially available speaker cables to connect the speak-
ers. These jacks can be used with both TS phone and speakON
plugs. When connecting a speakON plug, insert it and turn until it
locks in place. The amplifier mode selection determines the output
signal. For more information about selecting the amplifier mode,
see page 17.
#6 [AC IN] jack
For connecting the included power cord here. First, connect the
power cord to the mixer, and then plug it into an outlet.
#7 [USB] terminal
This is used only for performing maintenance. It is not used during
normal operation.
Rear Panel
#5
#6
#7
Amplifier Mode
Selection
[SPEAKERS A] Jack [SPEAKERS B] Jack
STEREO STEREO L signal STEREO R signal
L+R/AUX1 L+R signal AUX1 signal
NOTICE
Do not bundle or tie the power cord and speaker cables during
use. Due to the large current flowing through the speaker cables, it
may lead to acoustic noise or electromagnetic interference.