User Manual

Graphic Equalizer (GEQ)

EMX7 Owner’s Manual

1. Call up the GEQ ON screen.

Press the corresponding AUX1, AUX2 or STEREO [GEQ

ACCESS] button for the channel that you wish to apply the

graphic equalizer.

Turning the Graphic Equalizer

(GEQ) ON/OFF

NOTE

If another screen is shown, press the appropriate [GEQ

ACCESS] button until the GEQ ON screen is called up.

[GEQ ACCESS] button

GEQ ON screen

2.Turn the [MENU/CONTROL] rotary encoder

until the cursor highlights the GEQ ON but-

ton.

3.Press the [MENU/CONTROL] rotary encoder

to turn the graphic equalizer on or off.

NOTE

To return to the HOME screen, operate the [PROGRAM]

rotary encoder.

GEQ ON button

(Highlighted)When ON

When OFF

 Resetting the Gain for All Frequen-

cies

1. When the GEQ ON screen is displayed, turn the [MENU/

CONTROL] rotary encoder until the cursor highlights the

RESET GEQ button.

2.Press the [MENU/CONTROL] rotary encoder to bring up

the following confirmation screen.

3.Turn the [MENU/CONTROL] rotary encoder until the cur-

sor highlights the OK button. Press the [MENU/CON-

TROL] rotary encoder to confirm your selection. All gain

values will then be reset. (Select the CANCEL button to

cancel the reset procedure.)

RESET GEQ button