Service manual

EMX68S / EMX88S

DISASSEMBLY PROCEDURE

1. Front Panel Assembly

(Time required: about 3 min)

1-1. Remove the seven (7) screws marked [80] and the

screw marked [90]. (Fig.1)

1-2. Hold volume knobs and pull the front panel

forward. (Fig.1)

1-3. Remove the screw marked [100]. The front panel

assembly can then be removed. (Fig.1)

2. DSP-SPX1 Circuit Board

(Time required: about 4 min)

2-1. Remove the front panel assembly. (See Procedure 1)

2-2. Remove the two (2) screws marked [170] to

remove the shield case. (Fig.2)

2-3. Remove the four (4) screws marked [140]. The

DSP-SPX1 circuit board can then be removed.

(Fig.2)

[80]

[90]

[100]

Body Assembly

Front Panel Assembly

DSP

[170] [140]

[140]

[250]

[270]

(Fig. 1)

[80]: Bind Head Screw 4.0X12 MFZN2BL (VB132700)

[90]: Bind Head Screw 4.0X20 MFZN2BL (VB403600)

[100]: Bind Head Screw A4.0X8 MFZN2BL (VP156800)

(Fig. 2)

[140]: Bind Head Tapping Screw-B 3.0X6 MFZN2BL (EP600230)

[170]: Bind Head Tapping Screw-B 3.0X6 MFZN2BL (EP600230)

[250]: Cord Binder TS-0708 KSS (VZ765100)

[270]: Cable Cramp AB-3S-3M NYLON66 (V9078900)