User Manual
Table Of Contents
- 01_YH773B0_dkven_st_pro_om_en_fr_de_es_it_c1
- 02_1_YH773B0_dkven_st_pro_om_pre
- 02_2_YH773B0_dkven_st_pro_om_frontmatter
- 03_YH773B0_dkven_st_pro_om_en_body
- 04_YH773B0_dkven_st_pro_om_appendix
- dkven_st_pro_om_en_YH773A0 39
- dkven_st_pro_om_en_YH773A0 40
- dkven_st_pro_om_en_YH773A0 41
- dkven_st_pro_om_en_YH773A0 42
- dkven_st_pro_om_en_YH773A0 43
- dkven_st_pro_om_en_YH773A0 44
- dkven_st_pro_om_en_YH773A0 45
- dkven_st_pro_om_en_YH773A0 46
- dkven_st_pro_om_en_YH773A0 47
- dkven_st_pro_om_en_YH773A0 48
- dkven_st_pro_om_en_YH773A0 49
- dkven_st_pro_om_en_YH773A0 50
- dkven_st_pro_om_en_YH773A0 51
- dkven_st_pro_om_en_YH773A0 52
- dkven_st_pro_om_en_YH773A0 53
- dkven_st_pro_om_en_YH773A0 54
- dkven_st_pro_om_en_YH773A0 55
- 05_YH773B0_dkven_st_pro_om_en_fr_de_es_it_c4
Getting Started
2
Chapter
17
If your wireless router (access point) does not support WPS, you can
connect the Disklavier to a wireless router (access point) using an Ethernet
cable.
Press the POWER button to turn the power off.
(For grand pianos) Connect the wireless router (access
point) to the LAN port on the control center unit using an
Ethernet cable.
Note:
The inlet box is located on the rear
of the piano.
(For upright pianos) Connect the wireless router (access
point) to the LAN port on the inlet box using an Ethernet
cable.
Note:
For details on the DHCP setting, refer
to the owner’s manual supplied with
your wireless router (access point).
Enable the DHCP server function on the wireless router
(access point).
Wired Network Connection
1
2
Control center unit
Wireless router
(access point)
Ethernet cable
(Grand piano)
Inlet box
Wireless router
(access point)
Ethernet cable
(Upright piano)
3