User Manual
Table Of Contents
- 01_YH773B0_dkven_st_pro_om_en_fr_de_es_it_c1
- 02_1_YH773B0_dkven_st_pro_om_pre
- 02_2_YH773B0_dkven_st_pro_om_frontmatter
- 03_YH773B0_dkven_st_pro_om_en_body
- 04_YH773B0_dkven_st_pro_om_appendix
- dkven_st_pro_om_en_YH773A0 39
- dkven_st_pro_om_en_YH773A0 40
- dkven_st_pro_om_en_YH773A0 41
- dkven_st_pro_om_en_YH773A0 42
- dkven_st_pro_om_en_YH773A0 43
- dkven_st_pro_om_en_YH773A0 44
- dkven_st_pro_om_en_YH773A0 45
- dkven_st_pro_om_en_YH773A0 46
- dkven_st_pro_om_en_YH773A0 47
- dkven_st_pro_om_en_YH773A0 48
- dkven_st_pro_om_en_YH773A0 49
- dkven_st_pro_om_en_YH773A0 50
- dkven_st_pro_om_en_YH773A0 51
- dkven_st_pro_om_en_YH773A0 52
- dkven_st_pro_om_en_YH773A0 53
- dkven_st_pro_om_en_YH773A0 54
- dkven_st_pro_om_en_YH773A0 55
- 05_YH773B0_dkven_st_pro_om_en_fr_de_es_it_c4
Getting Started
English
2
Chapter
18
Press the POWER button to turn the power on.
Connection between the Disklavier and the wireless router (access
point) is automatically established in approximately 15 to 20
seconds.
Note:
For details on the Wi-Fi setting,
refer to the owner’s manual supplied
with your smart device.
Open the Wi-Fi setting screen on your smart device.
Enable the Wi-Fi function.
From the network list shown on the screen, tap on the
network to which you connected your Disklavier.
If necessary, enter a password, and then connect.
Note:
If the Disklavier is connected
directly to your smart device, no
Internet access is available on your
smart device.
You can use the Disklavier as an access point to establish a direct wireless
connection between the Disklavier and your smart device.
Press the POWER button to turn the power off.
Connect the USB wireless LAN adaptor (UD-WL01) to the
USB port on the rear of the switch box.
Note:
As a default, the WLAN switch is
set to the “RT” position.
Set the WLAN switch on the rear of the switch box to “AP.”
4
5
6
7
Direct Wireless Connection
1
2
LED lamp
WPS button
WLAN switch
3