User Manual
Table Of Contents
- 01_YH773B0_dkven_st_pro_om_en_fr_de_es_it_c1
- 02_1_YH773B0_dkven_st_pro_om_pre
- 02_2_YH773B0_dkven_st_pro_om_frontmatter
- 03_YH773B0_dkven_st_pro_om_en_body
- 04_YH773B0_dkven_st_pro_om_appendix
- dkven_st_pro_om_en_YH773A0 39
- dkven_st_pro_om_en_YH773A0 40
- dkven_st_pro_om_en_YH773A0 41
- dkven_st_pro_om_en_YH773A0 42
- dkven_st_pro_om_en_YH773A0 43
- dkven_st_pro_om_en_YH773A0 44
- dkven_st_pro_om_en_YH773A0 45
- dkven_st_pro_om_en_YH773A0 46
- dkven_st_pro_om_en_YH773A0 47
- dkven_st_pro_om_en_YH773A0 48
- dkven_st_pro_om_en_YH773A0 49
- dkven_st_pro_om_en_YH773A0 50
- dkven_st_pro_om_en_YH773A0 51
- dkven_st_pro_om_en_YH773A0 52
- dkven_st_pro_om_en_YH773A0 53
- dkven_st_pro_om_en_YH773A0 54
- dkven_st_pro_om_en_YH773A0 55
- 05_YH773B0_dkven_st_pro_om_en_fr_de_es_it_c4
20
English
3
Chapter
Other Settings
Note:
• To update your Disklavier, you
will need a USB flash memory
with 2GB or more of free space.
• You can also update your
Disklavier using the ENSPIRE
Controller app. To update your
Disklavier using the app, Internet
connection is required.
You can update the Disklavier firmware using USB flash memory.
Download the update program file.
You can download the update program from the following site:
http://download.yamaha.com/
Note:
It is recommended that the USB
flash memory only contains the
update program file.
Copy “en_update.bin” included in the downloaded file to
the root directory of the USB flash memory.
Press the POWER button to turn the power off.
Connect the USB flash memory to the USB port on the
front of the switch box.
Important:
DO NOT turn the power off or
disconnect the USB flash memory
during update.
Holding the PLAY/PAUSE button, press the POWER
button.
The POWER indicator flashes, and the Disklavier enters the
update mode.
If any available update program is detected, the Disklavier starts to
update. The update progress is indicated with the VOLUME
indicators.
When the update is complete, the Disklavier restarts automatically.
After the Disklavier restarts, check the firmware version using the
ENSPIRE Controller app.
Updating the Disklavier
1
2
3
4
USB flash memory
USB port
5
+
Flashing
twice