User Manual
Table Of Contents
- Table of Contents
- Introduction
- Control Screen
- Playing Function
- Information Screen
- Balance Screen
- Practice Function Menu
- Songs Screen
- Recording Standby Screen
- DisklavierRadio Screen
- Music Shop Screen
- Settings Screen
- Screen Layout in Portrait View
- Troubleshooting
43
NOTE
Since the ENSPIRE upright piano does not have a DIGITAL OUT jack, “DIGITAL OUT” and “DIGITAL OUT volume” are not available.
Setting the Disklavier for Audio Reception/Transmission
1 Return
Returns to the Connection screen.
2 OMNI IN
Selects the appropriate option to match the audio
input to the OMNI IN jacks.
• Auto: Selects this to have the Disklavier detect
the input signal automatically.
• Audio: Plays back audio from a connected audio
device and reproduces the sound from
the monitor speaker(s).
• OFF: Cancels the audio reception to the OMNI
IN jacks.
3 OMNI IN Volume
Adjusts the volume of the incoming audio signals
to the OMNI IN jacks.
4 OMNI IN Delay
Adjusts the length of the offset time that leads the
actual playback of the entire recording. The offset
time can be set over a range of 0ms to 500ms.
Decrease this value to delay the piano playing, and
increase to advance the piano playing.
5 Reset
Resets the volume to its default value.
6 OMNI OUT
Selects the desired audio to be output from the
OMNI OUT jacks.
• Output: Outputs the same audio
signals as the ones for the
monitor speaker(s)
• Output+PianoTG: Outputs the ensemble and
piano parts
• PianoTG: Outputs only the piano part
• Sync: Outputs the SMPTE signal
used for Video Synchronized
Playback.
• OFF: Cancels the audio
transmission from the OMNI
OUT jacks
7 OMNI OUT Volume
Adjusts the volume of the outgoing audio signals
from the OMNI OUT jacks.
8 Link OMNI OUT Vol to Main Vol
Links the OMNI OUT Volume to the main volume.
When set to ON, the OMNI OUT Volume works
with the main volume.
Scrolling down the screen calls up the following
items:
9 SYNC OUT Level
Adjusts the output level of the SMPTE signal. For
normal use, the adjustment of this option is not
required. If noises (synchronized signal) are output
from the OUTPUT jacks during Video Synchronized
Playback, turn down the level and re-record.
10 DIGITAL OUT
Selects the desired audio to be output from the
DIGITAL OUT jacks.
• Output: Outputs the same audio
signals as the ones for the
monitor speaker(s)
• Output+PianoTG: Outputs the ensemble and
piano parts
• PianoTG: Outputs only the piano part
• OFF: Cancels the audio
transmission from the
DIGITAL OUT jacks
11 DIGITAL OUT Volume
Adjusts the volume of the outgoing audio signals
from the DIGITAL OUT jacks.
12 Piano Delay
Applies a delay to piano playback to eliminate the
delay between the output from the speakers and
piano playback. The delay can be set over a range
of 0ms to 500ms.