User Manual

Connections
Registering a Bluetooth device (pairing)
When first connecting this product to a Bluetooth device, follow the steps below to register (pair) this
product with that device.
1 Set this product to pairing mode.
With the controller turned off, hold down the Function key on the controller until the indicator
flashes as shown in the illustration below. You will hear the “Pairing” audio message in the
earphone, and the earphone will enter registration (pairing) standby mode.
5 sec
Blue Red
Flashes alternately
2 Activate the Bluetooth function on the Bluetooth device.
A list of Bluetooth devices that can be connected will be shown.
15
Connections > Registering a Bluetooth device (pairing)